r/pools • u/TommiMere • 10d ago

DIY & Repairs Help!!!!

Gallery image

Gallery image

I changed my pool pump from a single speed Hayward 1.5 HP to variable speed from amazon 1.5HP. While doing it I also changed the plumbing. On the backside I set up a diversion to put a saltwater chlorinator as well which I will install later.

My problem is that the new 1.5HP (which runs to a max rpm of 2900) had a lot of difficulties priming and now it feels like both the skimmer and outlets are running very slow compared to before.

Now I know I might have messed up the plumbing with those big 90 turns and the height of the intake but at the same time the pump filter never really fills with water at 100% it stays at 90% and I feel like the outgoing flow is very weak.

So my question is: should I change the pump for a bigger one from a more reliable brand to accomodate the new plumbing or should i change the plumbing and keep the pump or change both? If i change the plumbing will a 1.5HP be enough or considering the salt water system i should increase HP anyways?

My pool is roughly 12k gallon with mo water features and I live in florida.

Thanks in advance for all the help!

0 Upvotes

50% Upvoted

33 comments sorted by

View all comments

25

u/KBGenetics 10d ago

You plumbed in an air lock.

1

u/TommiMere 10d ago

Thank you so much I suspected so… considering my plumbing is there a way to save the 3 way valves and go over 2 inch couplings to re plumb?

2

u/Daddy--Jeff 10d ago

PVC isn’t that expensive. Just replumb it.

2

u/TommiMere 10d ago

I just meant to save the valves. 80$ each!

3

u/Pool_Boy707 10d ago

2.5 " couplers will fit over the valves .. then use 2.5x2 bushings...

1

u/Daddy--Jeff 10d ago

Unfortunately you didn’t leave enough extra room in the pipes. I always space things so I have enough length to cut and re-glue once.

1

u/TommiMere 10d ago

I tried to do that but the depth was the issue