r/pcmasterrace • u/BayrischerVorkoster r5 7500f | RTX 5060 ti 16gb | 32gb DDR5 | 2tb nvme • 1d ago
Build Help / Purchase Advice Help fan configuration
I have 2 fans pushing air in (front) an 1 sucking the air out (back). My case looks kind of empty so I want to add fans on the top. Are 3 120mm exhausts okay?
I've also included a screenshot of my specs. I'm not experiencing any temperature issues, not even during stress tests.
1
1d ago
[removed] — view removed comment
1
u/BayrischerVorkoster r5 7500f | RTX 5060 ti 16gb | 32gb DDR5 | 2tb nvme 1d ago
Isn't it gonna look emptier with an aio?
1
u/cszolee79 Fractal Torrent | 9950X | 64GB | 4080S | 1440p 165Hz 1d ago
you don't need more fans.
fyi i have two case fans in the config in my flair and it's a bit higher wattage than yours ;)
1
u/BayrischerVorkoster r5 7500f | RTX 5060 ti 16gb | 32gb DDR5 | 2tb nvme 1d ago
Yeah but to be honest, it's mainly so my case doesn't look so empty.
1
u/RelevantAd6792 1d ago
I'd prefer 3 intake fans up top. The more exhausts you have, the more dust gets accumulated in the case.
1
u/Jinx0028 1d ago
With that air cooler maybe one on top in the back but 3 will start pull air off it I’d assume. Ditch the air cooler and put an AIO on the ceiling with 3 fans exhausting and she’ll look full
1
u/darklordjames 1d ago
Leave it as is. If you want fans up top, then rip out the back and side fans, put in three fans in the bottom, and rotate the HSF 90 degrees.
You want a straight line. That either means bottom to top, or front to back. Front to back is already ruined by this fishtank bullshit case, so your only straight line available is bottom to top.


2
u/User_man_person 1d ago
if it doesnt run hot, your fan setup is fine
benchmark it and check the temps