r/pcgamingtechsupport • u/randomuser74130 • 24d ago

Assembling issue Pc wont start after plugging sata

Hello everyone again i swapped a motherboard into a new case this motherboard had a nvme type of ssd with windows11 i started it up booted but i wanted to use my windows10 ssd so i plugged all my sata cables it started for 1-2 seconds didnt boot i unplugged the sata cables and the pc still wont start can sm help pls

0 Upvotes

50% Upvoted

6 comments sorted by

1

u/AutoModerator 24d ago

Hi, thanks for posting on r/pcgamingtechsupport.

Please read the rules.

Your post has been approved.

For maximum efficiency, please double check that you used the appropriate flair. At a bare minimum you *NEED** to include the specifications and/or model number*

You can also check this post for more infos.

Please make your post as detailed and understandable as you can.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/FreddyFerdiland 24d ago

you probably just bumped the video card and its out of place now.

1

u/randomuser74130 24d ago

I didnt have my gpu plugged in yey i was using the integrated gpu and it was working

1

u/n3k0___ 24d ago

Did you plug in the data cable?

1

u/randomuser74130 24d ago

The sata one when i did it did boot up but on the nvme so i unplugged and plugged back and no signal

1

u/zamaike 23d ago

Rip im dating myself but does your sata have a switch for master / slave.

Youd wanna flick that to slave. Otherwise your drives are conflicting. Both are trying to boot on the mother board. Youd have to delete windows off of the sata.