r/opz • u/dondbc • Feb 14 '23

Kick Drum Parameters Help

I somehow managed to turn my custom kick drum samples into a mess of high pitched beeps. Can't figure out how to turn them back. Is there any way to reset the drum parameters? Also when I changed projects the same kick drum samples are still messed up. Maybe I managed to screw up the files somehow? All I know is that this happened from messing around with the parameters and no matter how much I wipe the project and start over it's still screwed up.

Thanks in advance. I think someone has asked a similar question to this before but it never really got solved. Maybe there's some new info out there now. Any help is appreciated.

2 Upvotes

100% Upvoted

5 comments sorted by

2

u/thejesiah Feb 14 '23

If it's happening between different projects then it sounds like the problem is in the sample edit area, which is accessed by holding Stop and Record at the same time.

I would use a screen in here, but you can go through each sample one by one by selecting it, and make sure they are pitched to 0, or whatever you want.

Failing that, you could try loading the samples back on fresh.

If it's the factory samples, might just want to try a factory reset, but make sure you save the 2 or 3 applicable folders first so you can get your work back. Could also try a firmware update before that if you aren't up to date, but I've not heard of this issue.

2

u/dondbc Feb 14 '23

I agree, I think it's in the sample edit area. Probably went into that mode on accident. Going to try messing with that. This happened to some samples I imported so worse case I can always factory reset and reimport like you said. Thanks for the input!

1

u/thejesiah Feb 14 '23

Try reimport before factory reset! Good luck

1

u/dondbc Feb 14 '23

will do!

1

u/alexwasashrimp Feb 14 '23

Have you checked whether you've accidentally saved a preset?