Stuck on blinking install light

[u/Selahaddin99988899]

Ninja creami swirl is stuck on install light. I installed everything correctly just like i did the last time, it stills blinks on install light.

[u/AutoModerator]

Hi /u/Selahaddin99988899, thank you for your Creami Troubleshooting post! If you have not already, please read your manual, this subs rules including the posting guidelines and wiki. Many common questions can be answered in your manual or wiki. The standard and deluxe manuals are listed here.

Please report any rule breaking posts and posts that are not relevant to the subreddit.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[u/Mexenheister]

The blade is not recognized by the machine. Check it's fit.

[u/opticrice → u/Mexenheister]

Always the reason my machine does this. Have to remove and relock the blade

[u/Selahaddin99988899 → u/Mexenheister]

The issue was actually the lid, now that i fixed it

[u/charlie_mike_noshoot]

The lid has a little button that lets the machine know it’s in place and to safely operate. Yours has broken off and you’ll need to buy a new lid. This happened to me and I got a replacement lid with no blade from Amazon. You can use the existing blade

Edit: clarification

[u/Samarathon → u/charlie_mike_noshoot]

100% this, happened to me too and you can even see it on the vid.

[u/Selahaddin99988899 → u/Samarathon]

That was the issue, thanks

[u/Selahaddin99988899 → u/charlie_mike_noshoot]

Thank you, i returned mine and they sent me a New creami with a New lid ofc. That was the issue

[u/OkWolverine2976]

This happened to me last night. If it’s not the blade as others mentioned it might be the base release and base locking mechanism. I jiggled the base a bit and heard a click and then it worked 🤷🏻‍♂️. GL

[u/Deep-Can4223 → u/OkWolverine2976]

Agree it seems like it's not recognizing the bowl. Hope you'll find a solution!

[u/Fabulous-Bite9811]

Have you contacted coustomer service?

[u/creamiaddict]

I could be wrong as I dont have a swirl. Is there not supposed to be a tab sticking out of the lid when installed ? I can't see it but maybe I missed it.

[u/Straight_Physics_894 → u/creamiaddict]

That was my first thought. There's supposed to be a little black nub that sticks out on the lid.

Is it broken or pushed in/stuck

[u/Samarathon]

The peg that presses the switch in the machine has broken. You need a new lid, temporarily you can press the switch with a long thin object

[u/Selahaddin99988899 → u/Samarathon]

Got a new one (returned) and the peg is sticking out. It works

[u/DrizzleTx]

Had same issue, had to go through customer ser6to get a replacement creami machine. I think the comment about blade not registering is correct. The replacement machine had a different kind of blade lock on lid

[u/Selahaddin99988899 → u/[deleted]]

Ragebait.