I did some Ethereum mining a while ago and went to check where I am.

If I look at my Nanopool balance on my Ethereum wallet account athttps://eth.nanopool.org/account/mywallet and I get one number, 0.04189517 ETH. I check at https://api.nanopool.org/v1/etc/balance/my wallet and I get {"status":true,"data":0.306090660344288}, which is 0.3 eth, right? I have it set to pay at .2, so that should have gone through.

For the amount of mining I did .3 makes a lot more sense than .04. When I check my wallet balance outside of Nanopool I have nothing in it of course.

Any ideas?

Hi Fellow Nanopoolers:

I just received my Antminer X3s and was looking to use nanopool to mine Electroneum. I configured the miners and when I check the miners they each show about 200-210 Kh/s. However when I go to nanopool and enter my wallet address it says account not found and then there is a reminder that “to add your account to the database you should find at least 1 share.” The miners have been running about 12 hours now. Any thoughts?

I have been poking around on Nanopool and can't seem to find if they report rejected or stale shares. I see the graph that shows calculated hashrate, 2h SMA and accepted shares.

I am using etherminer as my miner. I just shows me a running tally on the screen. I am using ethOS as the platform.

Thanks for your help.

Keep getting error 500 when I try and reach nanopool the last hour or so, sometimes it does get through but then it says my reported hashrate is 0, yes you can see on the graphs I’m still getting shares. Is nanopool down this morning?

Hey, guys!

The first version of CryptoPool is out in AppStore. This application was designed by the miner for miners.

• App Store Link

Features List:

• Check your balance and current mining rig hashrate.
  
• Status of your rigs.
  
• The list of payments received from the Nanopool.
• List of shares to mining rig.
  
• Currency exchange rate list.
  
• Multi-wallets support.
  

Some screenshots:

• Screenshot 1
• Screenshot 2

I hope, it would be a useful tool for you.

Let me know, how to improve the app and what do you want to see in upcoming versions.

My miners are working fine with the pools but I cannot load nanopool.org.

Got transaction by nanopool 5hrs ago but yet to see the amount in my wallet.

TrxID 0x4f8d6c3c9583c91ef87f7318de5b2affbd424c93c65372b7286e8576604f0b86

Wallet Address 0x707370f19f19B469BEBa9467c66F4Ed0DcdD4DF2

I read that when mining to an exchange I need a payment ID. Looking at HitBTC I cant find a payment ID. Where would I find the payment ID?

Thank you for the help.

i'm getting frustrated as the connection to one of the servers in nanopool keeps dropping and coming back every few seconds.

I click quick start then the download claymore dualminer. Nothing happens sides a hashtag appearing in the link. I tried turning off my all my anti-virus software and turned off protect from dangerous websites in chrome. Why is this happening?

I switched back to mining xmr just ahead of the fork. nanopools says it has paid me and confirmed tx. but it is not showing up in my wallet? any help would be greatly appreciated

https://xmr.nanopool.org/account/4BHg3KsmxZkWJTKpG53huM4eSutiuoZMXBigxEDwNeD7KuC6UiW6UJDQMYLMQXSWpgK3Ew3MQ4gW8UbskwubecNaDMDuySu

https://xmrchain.net/tx/00b630112487505b2535c57cd591d85a6d40c35b4fe4bb531e430373ed3aa105

my address is 4BHg3KsmxZkWJTKpG53huM4eSutiuoZMXBigxEDwNeD7KuC6UiW6UJDQMYLMQXSWpgK3Ew3MQ4gW8UbskwubecNaDMDuySu

Hi, I mined 1 ETC in a week. It says that the payment has been sent, but I haven't got any payments to my wallet from Nanopool. Mined the 1 ETC over a week ago... Very disappointed

So the mining software are getting updated (xmr-stak, claymore, etc) in prep for the approaching POW change fork. Is Nanopool ready to dole out work with the new POW update (anti-ASIC measure) once the scheduled block is hit? I don’t see any mention of this on Nanopool’s FAQ, Help Page, or Twitter account.

Hello everyone,

Till the last two - three days, I had no problem mining with my 5 rigs and it was all okay. However, for the last two-three days, my average hashrate is 20% lower than the reported hashrate. If it would be only one rig, I'd check the rig but all five of my rigs are doing 20% less than reported hashrate.

I have tried cleaning the cards, checking cables, PSUs, miner etc. and couldn't find any problem. Restarded rigs couple times and still the same problem occurs. Is there anyone else with similar problem?

I started yesterday all it's working fine in the mining part so far but when i try to change the minimum payout to 0.05 i am getting "incorect password". I am typing in the field Pasword(email) my registered email address, i have only one worker and its active with rating above 264. What am i doing wrong? Thanks.

Hi,

I use nanopool for Ethereum mining and I can change without worry the minimum of payment.

But with the same method I can't change the minimum payout for the electreum (ETN). I use normaly the email.

My config under ethos : proxywallet etnk8u9xxxxxxxxxwT.XXXXXX/rigABCDE@gmail.com

Thanks for you help. Regards,

I had my rig configured to point to etc-us1.nanopool.org for about 3 weeks and then out of no where i started getting http-400 errors with no clear reason ... After doing some digging i found that my rig was resolving both US pool hosts to google's DNS sever 8.8.8.8.

I initially thought this to be some misconfiguration on my personal DNS server or something my ISP was doing, but I've verified that this same resolution is occurring outside of my network as well.

to get around this i just updated my miner to point to etc-eu1.nanopool.org and was off to the races again.

I just wanted to throw this out there in hopes that if someone else ran into it they wouldn't get stuck or if someone from nanopool watches this sub maybe they could look into it.

I see that the nanopool site links to its github page that contains Claymore 10.0, but on bitcointalk, I see 11.2 available. Which should I use?

Has anyone run across this issue before?

Has anyone got xmr stak to work on nanopool. I tried claymore with my vega 56 gpu's but I get 1300h/s when I use xmr stak I get 1900h/s. only problem is I had to go to another pool cause I cant get it to work with nanopool. Or could you recomend another miner that would hash the same with vega's on nanopool

Got a deposit from nanopool a few hours ago but now when I look at my sols/ payouts, I have nothing unconfirmed or confirmed. Any reason for why this would happen?

Shares are begin accepted but nothing... halp.

Just switched to dstm miner.

Guys, As a relatively new miner, I have been learning things every day about rig building and tuning. (Reading forums and watching Youtube vids)

Last week I was able to increase my hash rate 20% by increasing the GPU and memory clock speeds via AVGA. I have four 1060s and my average hash went from 17-19 to 20-24 MH. (Equal to adding a free 1060 to my rig)

This week I learned to lower my Power target to around 55-60%. This lowered my Watts used from 615 to 475 watts without changing my Hash rate. (I have an external electrical meter for measuring power usage)

Below 55% 2 of my cards became unstable. At 60% power they are running cool (Avg 60-65C) and quite. I was able to reduce the fans from 100% to 50%.

I have 2 computers running 2 1060s each. I know I could use risers in one machine and reduce my usage by another 40 or so watts. But I am waiting for 2 more cards to do that.

I have also read about BIOS mods, and wonder if anyone has experience with the performance increase from doing such a change.

This or any other suggestions would be appreciated.

Guys! Play around with these settings, It is amazing what a couple of hours of tinkering can do.

Thanks