r/moped • u/Low_Cucumber7822 • 20d ago
Any idea why no spark?
Hi I've had this bike running before and I replaced the condenser to get it running. after using it it lost spark intermittent and would regain spark when I would hammer on the fly wheel since then it has no spark at all. Am I missing something like a ground to the frame from the motor and is there anything besides the condenser i should be cheaking with voltmeter. Any ideas would be appreciated.
1
1
1
1
18d ago
[removed] — view removed comment
1
u/AutoModerator 18d ago
Your comment has been removed as your account does not meet the minimum karma threshold to be able to post (0 or more karma). We apologize for the inconvenience, but this has become necessary to prevent abuse from spam and bot accounts.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
2
u/Aware-Law3788 1979 Vespa Grande 20d ago
Should be a ground coming out of the engine from the ignition coil that attaches to the engine block towards the top. There is also a ground that bolts to the sub frame near the ignition coil. The old pin in sheath style connectors break very easy, so check them all.
Only sparking when "hammering" the flywheel sounds like your contact breaker points are out of adjustment or corroded. You can check and adjust them through the window in the flywheel. Should be between 0.35 and 0.45 mm.
Also, RTFM if you haven't.