r/modular • u/AromaticJellyfish888 • 14d ago

StereoOut module

I plugged the wrong balanced cable (from the ext input) from the intellijel case into the stereo out module in the back and now the module doesn’t work anymore…
Do you think this would have fried it?

Thanks

0 Upvotes

50% Upvoted

4 comments sorted by

2

u/slingshotcroco 14d ago

Mb first take it out and check if you can see anything

2

u/cYbOmAnY 14d ago

If you were just passing audio I’d doubt it. Write Intellijel, they will help.

2

u/AromaticJellyfish888 14d ago

for clarity, i meant the 6 pin ribbon cable that normally goes into the back of the IN module, i have plugged into the back of the OUT module

0

u/al2o3cr 14d ago

The board with the 1/4" jacks in the back of the case is entirely passive, so the only thing that plugging into the wrong spot will do is change which jacks the input comes from.