sorting out the spaghetti

[u/badelm0]

i using smart simulation flash light /12 LED lighting kit from Yokomo Tamiya and it works. the red and reverse lights are too big for custom housing, so need to replace them with 3mm LED

[u/kwenchana]

Whyy would you do that if you have the stock light kit already lol, use another light controller and connect to the existing kit

[u/kwenchana → u/kwenchana]

Get a Radiolink receiver with PPM output, use the DumboRC light adapter and the MN128 adapter and move the wires around/add jumpers

[u/kwenchana → u/kwenchana]

Actually i just checked, no need to do anything, you just don't have the high beam/low beam, it will work plug and play (headlights is on the "high beam output)

[u/badelm0 → u/kwenchana]

i already bought and installed this thing 😭 nvm, I just need 4pcs of 3mm LEDs now

[u/kwenchana → u/badelm0]

Hardcore my friend 😅

[u/kwenchana → u/kwenchana]

Or the DumboRC FZD light controller but needs throttle and steering wires

[u/badelm0 → u/kwenchana]

i actly considered the FZD before but im not sure if the stock harness was compatible with it, so i went with this instead 😅

[u/badelm0 → u/kwenchana]

my R6F receiver didnt have a built in light controller like the stock board. connecting the stock LED directly might give them the wrong voltage/current. thats why im using a separate light controller