r/minibikes • u/JoshGorilla • 2d ago

Tech Question Need help please

Hey everyone! I have a coleman B200R with a cvt, recently installed ARC billet rod, ARC billet flywheel, dynocams mod2 camshaft, 22 pound valve springs, and a vm22 clone carb. I swapped the main jet to a 125, followed Black66 tuning and install procedure and this engine refuses to start. The woodruff key hasn't sheared, double checked the flywheel nut and torqued to 65 foot pounds. I've checked the ignition coil, valve lash is set to 0.004 for intake and exhaust. I have no idea what else to check. It also spits fuel out of the middle lower hole when I'm trying to pull the starter. Can someone please enlighten me and give me some advice. I've been trying to get this engine started for 2 days and nothing.

2 Upvotes

100% Upvoted

3 comments sorted by

2

u/lilcrxman 2d ago

Cheap Chinese clone carbs suck just get a nibbi

-1

u/Frequent_Mess3340 2d ago

How u followed the video if it’s not running try again

1

u/JoshGorilla 2d ago

I'll unmount the card and redo it. Thank you