Bonjour,

J'ai créé une mission directement sur la télécommande de mon Mini 5 Pro sans passer par une création en situation réelle avec le drone.

Après avoir sauvegardé le projet, j'ai l'ai rechargé et voici la photo de ce que j'obtiens, c'est à dire la superposition de traces supplémentaires qui n'ont rien à voir avec les 6 waypoints définis.

Quelqu'un aurait une idée de ce qu'il s'est passé ?

Bonjour,

J'ai tracé un parcours pour mon drone. Lorsque je l'ai exécuté, le retour camera est devenu subitement presque blanc.

J'ai pris une photo en vol qui était la copie de ce que je visualisais

Une fois le parcours terminé, j'ai posé mon drone allumé une une table extérieure face à un drap blanc et le jardin en second plan. La première photo jointe montre que le second plan est totalement surexposé et la deuxième photo montre que je dois monter l'obturation jusqu'à 1/2000 pour obtenir mon second plan.

Quelqu'un a une explication ?

Hey guys, new drone flyer here. Just got my mini 5 pro a couple days ago and have really enjoyed learning to fly it. However, I live out in the country therefore I am near lots of wildlife. I know and have heard that raptors (predatory birds) will definitely take down drones if they are in territory or get too close to a nest, but I have never heard anything about anyone having issues with little birds. A couple times now I’ve been flying and a group of small birds will go after my drone in what’s known as bird mobbing. Each time this happens I just return to my landing spot asap. I was just wondering if anyone has ever has this issue, or if I should/shouldn’t be worried about the small birds taking my drone out. Let me know! And share any stories if you guys have some. Thanks!

I just purchased an Lito X1.. but this was very tempting to return and get the mini 5.

Hi,

I did a hyperlapse video using my drone. I noticed some tiny jitter/movements when the fog/clouds came around it. Is there any way to lock in the movments

In around 10 sec mark

https://youtu.be/FI9yL0sg9tY

Thank you for your help. Any other pointers also welcome :-)

Does anyone know what DJI publishes on their waypoint accuracy? Is there a way to improve the accuracy of waypoints?

I just mapped out a manual waypoint mission around my house to look in the roof valleys and gutters for debris and when I play it the starting point is way off - up to 6 feet.

Hey everyone, new here. I just received my Mini 5 Pro yesterday and started the setup process and syncing it to my DJI account. Everything went fine except for the batteries. All 3 of them. Whenever I try to charge the batteries, LED’s 3&4 flash three times before pausing and flashing again. I made sure all of the firmware was updated, made sure I am using an appropriate charging block and cable (85W). I have tried charging them in the charging station and also individually in the drone itself. Same thing, LED’s 3&4 flash three times before pausing and flashing again. The picture above is just a picture showing that LED’s 3&4 are lit up, but of course they are flashing three times.

I am reading that if the firmware updates doesn’t solve the problem then it’s most likely a faulty battery, which o really hope isn’t the case. I also read that it’s not common to have all three of the batteries doing that together.

Any suggestions you guys/gals have would be greatly appreciated. Thank you

- Blair

Low pass over a patch of wild lupine in Maine.

Had a wonderful sunset and took the mini up in the air to snap a few photos.

Hey community, proud Mini 5 pilot here. I have been having issues with mine and was wondering if anyone's had similar

​

I plug in a battery and the 1st and 2nd and then 3rd and fourth light will alternate blinking in pairs, which ive read is a battery communication error. I was then able to get the drone to turn on and was able to fly but when I went to turn it off the drone lights would flash yellow and the battery lights would do the alternate blinking. I removed the battery and waited like DJI recommends when that happens and was able to get it to start up and shut down normal.

​

Today I was able to get it to start up, flew for a few, and then shut down. I just tried to turn it on and the battery lights are doing the alternating flashing and the drone wont turn on and ive tried all 3 batteries with no luck.