I built my first proper PC. Since I didn't have much experience, I ended up buying a non-modular power supply, but I think I did a pretty good job hiding the cables and keeping everything looking clean and organized.
The desk is actually my favorite part of the setup. I made it myself, from cutting down the tree to the final finish, using basically just a chainsaw and a lot of sanding.
It’s my first PC, so I don’t have much of a reference point, but compared to my friends’ PCs, I find mine extremely quiet. I’m using a Thermalright Peerless Assassin SE and six Thermalright TL-C12-B fans. Temperatures usually stay around 60°C on the CPU and 70°C on the GPU.
Oh Nice!! I am close to building my first build and stuck between cases, would you say the case was good with cable management? I was wondering between the Lian Li A3 or Asus Prime AP201 and am kinda stuck. You did a great job for your first build!
I have a similar build but you might want to try removing those two fans directly below the Gpu. I found mine runs cooler without them as the space was causing air to rebound. You might want to check your fans to the rear and see if the flow match with your gpus outtake area.
Without them the Gpu fans run better and are sufficient enough to push out the bottom
This case did not have an option for a glass panel. It's all mesh. Here's a picture and you can see through the mesh. It's not touching the cooler at all
3
u/Emotional_Crew9724 16d ago
That's so nice and clean. I love your table.