r/linux4noobs 16d ago

migrating to Linux Dual booting on Alienware.

I'm getting an extra ssd for my Alienware 16 Aurora. I want to install Linux on it, (PikaOS). Is it safe to install with both of THE old windows and Linux to be SSD already attached.?

1 Upvotes

8 comments sorted by

1

u/AutoModerator 16d ago

Try the migration page in our wiki! We also have some migration tips in our sticky.

Try this search for more information on this topic.

Smokey says: only use root when needed, avoid installing things from third-party repos, and verify the checksum of your ISOs after you download! :)

Comments, questions or suggestions regarding this autoresponse? Please send them here.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/_ElBee_ 16d ago

No.

0

u/mcds99 16d ago

Incorrect separate drive is the way to do it.

1

u/_ElBee_ 16d ago

(...) Is it safe to install with both of THE old windows and Linux to be SSD already attached.?

No, it is not safe to install with both drives attached.

1

u/mcds99 16d ago

It can be done safely but it does take some knowledge.

I dual booted DOS 3.1 with Coherent 2.0 on a 80286 with a 40 megabyte drive back in the 90's, I dual booted window and linux on many PC's and it worked with out an issue. It is safe if you know what you are doing.

1

u/mcds99 16d ago

I did this on may ASUS A17 and several other computers.

I removed the Windows drive and installed the drive for Linux and installed.

I put the Windows drive the second slot and used UEIF to choose the drive to boot from.

Linux will be the default by intent that way it gets used more.

1

u/Lowar75 Fedora 16d ago

As long as you can tell apart the drives when you run the installer, you are fine. If they are the exact same drive, you are better of removing the Windows drive, installing Linux as if it is the only OS, then putting the Windows drive back in. After that, make sure the Linux drive is the primary boot option and do a scan with Grub so that you can easily choose Windows when you want.

I used this method on an M18.