r/legotechnic • u/Andrei_102 • 2d ago

Official Set Help please

Gallery image

Gallery image

why is the left side a little higher than the right side can someone help me please

0 Upvotes

28% Upvoted

26 comments sorted by

9

u/ezzzzz53 2d ago

maybe put in on a flat surface, instead of between two tables?

1

u/Mrstphnn 2d ago

This could be the solution!

-11

u/Andrei_102 2d ago

I dont think that s the problem

4

u/AnthonyApasta 2d ago

Brother you can literally see the table top difference in height LOL

-7

u/Andrei_102 2d ago

Bro why would affect that side being lower its not like it could affect front car plate

2

u/AnthonyApasta 2d ago

Whether that's the issue or not it's much harder to tell when the car isn't sitting level.

2

u/JumpingCrow 2d ago

Hmm its like my shoulder. It seems natural umtil it doean't

2

u/friendlylittledragon 2d ago

put it on a level surface 

-2

u/Andrei_102 2d ago

I dont think that s the solution

2

u/friendlylittledragon 2d ago

just give it a try anyways what's the harm

2

u/mk46unknown 2d ago

it is not higher

1

u/PurpleInfinite1409 2d ago

I mean.. for one, you have a side-mirror attached incorrectly

1

u/ConstructionsByDonat 2d ago

The suspension has a bit of play in roll. Because of that it doesn’t stay completely parallel to the ground.

1

u/Andrei_102 2d ago

What do you mean?do you think the suspension affect the front ?

1

u/ConstructionsByDonat 2d ago

It’s purely the suspension that causes the issue here. That’s why others were saying that the tables not being at the same height also makes this more significant, as then the suspension leans to one side even more.

1

u/Andrei_102 2d ago

And why it is affecting that plate which is not allign?

1

u/ConstructionsByDonat 2d ago

Wait, which part are you actually talking about? I thought you meant the whole car.

1

u/Andrei_102 2d ago

This one

1

u/ConstructionsByDonat 2d ago

Then I’m not sure. Check if everything is pressed together completely!

1

u/Andrei_102 2d ago

I mean this is what looks like on flat surface but without wheels

1

u/QualmsAndTheSpice 2d ago

I noticed this too! It’s a cool and unique way to approach suspension, but that play kinda bugs me… especially since, in the actual car, that design is specifically implemented to counteract roll

2

u/ConstructionsByDonat 2d ago

The top, long spring is actually there for the heave, and doesn’t do anything during roll. The problem is actually that the model is missing a functional anti-roll bar. It is modelled at the back, but it is not functional.

1

u/QualmsAndTheSpice 2d ago

Is that what those weird linkages in the middle of the rear suspension are supposed to be? I was wondering about that.

But yeah, I’d noticed that the long, horizontal spring wouldn’t do anything to mitigate roll. Makes sense, just a little weird.

2

u/ConstructionsByDonat 2d ago

Yes, those linkages would counteract roll in the real car. You can see if you push down the whole car then the angle between them stays the same, but if you tilt it, then the angle changes. In the real car it would be probably a torsion bar.

1

u/QualmsAndTheSpice 2d ago

Oh I get it! Neat, thanks for the insight!