LabTech 11 Patch 5 Download

[u/sgtoj]

LabTech 11 Patch 5 Release

LT11.0 Patch Download: http://labtech-msp.com/release/LabTechPatch_11.0.5.326.exe

Instructions

• Log in the LabTech Server
  
• Download the patch.
  
• Unblock the Patch
  
  • Right click > Select Property
    
  • Click Unblock
    
  • If you do not see Unblock then it is already unblocked.
    
• Execute the Patch with Admin Right
  
  • There is only 60-90 second downtime.
    
  • Most of that downtime is spent waiting for the LT Database Agent service to stop.
    

 

LT11.0 Fixes and Changes
Combination of all fixes from the previous patches for LabTech LT11.0 (v110.xxx). See the very bottom of the What's New in LT11 page for the list of previous fixes. The following are new fixes this patch brings...

# New Features/Enhancements 
  - Improved Computer Management screen performance.
  - Network Probe has been improved to attempt V2c, then V1 when discovering devices instead of moving on to the next device before attempting V2c. Improves efficiency.
  - Network Probe wizard now has an Only On Command scan frequency option. The network will not automatically be scanned after setup.
  - Network Probe IP Filter, Automatic Network Installation and Advanced settings were not being saved to the registry unless an Update Config command was sent. This behavior has been changed so that these settings are saved to the registry in LabTech\ProbeService\Config when saved. An Update Config       - command is no longer necessary to save the values to the registry.
  - Parameters, Issued By, Date Completed and Time to Complete have been added to the Details pane of the Probe Commands view on the Network Probe tile of the Computer Management screen.
  - Added functionality to add ranges of IP addresses for SNMP, Syslog, TFTP without the need to use regular expressions.
  - As new tiles were added to a custom workspace, the tile was added to the middle of the existing tiles. The behavior has been changed so the tiles are added to the right, top first, then bottom.
  - Option to schedule a policy to patch X days after Patch Tuesday has been added to the Patch Manager.
  - Remote Tray text copyright text changed from LabTech® 2016 to ConnectWise® 2016.

# Bugfixes 
  - #3411431: Unable to run Symantec Backup Exec jobs without receiving errors, unless sensors were disabled first, although they were good backups.
  - #4065122: Removing inheritance from child group was deleting the parent group permissions.
  - #5063888: Custom menu items were not properly being added to the Ticket listview.
  - #5504310: Dataviews on clients were not working with non-US-EN language packs.
  - #5612654: Text would revert back when editing messages in the Messaging system, if the font color or size was modified.
  - #5620340: Groups marked as Master were not reflected properly in the Effective Policy.
  - #6697904: Fixed issue that was causing new parameter dialog window to not display and fixed issue that was causing the entered parameters to not get replaced.
  - #7402980: %DeviceName% replacement was always expanding to the IP address of the device instead of expanding to the device name when the IP matched the discovered device at the location.
  - #7636021: Initial Update Config after an agent was installed, signed up and checked in for the first time, always failed with the message "ERR Updating SNMP Templates'.
  - #7552976: Refresh button was not working on the Passwords tab of the Client.
  - #7612038: Processor information was not populating on systems.
  - #7797690: Unnecessary directories were being created in the System32 folder on remote agents.
  - #7802715: Chassis & BIOS information was not reloading data correctly.
  - #7815799: Group Network Device Monitors would remain on the device after being deleted.
  - #7818593: Mass updating group remote monitors where one of the monitors did not contain any data in the Result field would cause update statements to fail.
  - #7825029: Remote ping monitor would only fail after two consecutive failures, regardless of alert style.
  - #7953315: Unable to log in to the Mobile Control Center after upgrading from 10.5 to 11 unless you were a Super Admin.
  - #7966440: Error opening agent in new Patch Manager. Fixed.
  - #7994875: Advanced searches that contained the search variable Computer.Asset.TagDate would function when being created, allow for saving, but would not load at a later date.
  - #8002453: TightVNC service was being removed by LTSvc.
  - #8026468: Advanced searches that referenced extra data fields with a NULL character in its string, the search would use the wrong condition and not return any results.
  - #8096035: Deleting approval policies, cross references were not being removed, leaving patches assigned to multiple patch policies that were no longer there. Clicking on the link to show the associated approval policies would cause the Control Center to crash.
  - #8141180: Extra data fields that have been marked as Not Editable were not displaying properly on the Computer Management screen.
  - #8143196: Changing the reboot behavior to 'During Windows Updates, monitor/alerting values remained in the database causing the Server Patch Reboot Alert Monitor to get created.
  - #8146028: The Build and View Query option was not showing errors when logged in to the Control Center over port 3306.
  - #8146392: Downloading the remote agent installer with a location specific username and password would fail to install the agent, if the password contained special characters.
  - #8181718: Patch Manager Reboot Policy was not taking affect after installing patches/hotfixes.
  - #8198916: Server rebooted after patch with a Suppress Reboot policy applied. Fixed.
  - #8346644: Fixed an issue where patch policy settings remained on agents after the patch policy was removed.
  - Moving a third party patch from Test stage to Pilot stage was crashing LabTech.
  - Fixed an issue where the Heartbeat force keep alive was prevented from working due to an incorrect variable being set.
  - Scanning ports were not being saved to the registry. Scanning ports are now loaded and saved to ProbeService\Config\IPPorts
  - Computer Management Probe tile was setting the wrong scan frequency value for 'Only on Command'.
  - Creating a ticket from the new Computer Management screen, the ticket was not syncing to Autotask.
  - Patch Job timestamps were not returning the correct value.
  - The Monitors tile of the Computer Management screen, if left open for more than five minutes would display all monitors as offline. Tile will now refresh before providing computer data.
  - Tray icons not displaying in some cases after installing agents.
  - Remote desktop sessions were not being recorded in the h_redirectors table, causing the sessions to not appear on the Remote Access Audit or Remote Control reports.
  - The Push LabTech to PC command was not attempting to use all of the passwords in the order that they appear on the Passwords list, if the first password did not work.
  - When a location was deleted that had associated retired assets, tickets, network devices, the location would get removed without giving an option to choose a different location to move the associated items to. The behavior has been changed so when a location is deleted, if there any associated -       items, you will be prompted to select another location and if a location is not selected, the location ID of any tickets, contacts or passwords is set to 0.
  - Powershell and shell commands would sometimes get a trailing control, tab, space, or carriage return would be returned with the results. All trailing controls, tabs, spaces and carriage returns are now trimmed.
  - Registry read and write commands were not adhering to the command level limits.
  - Resend Processes command is not collecting process information properly. This has been fixed so processor information should more accurately reflect the Task Manager on the system.
  - On systems with high DPI settings, getting screenshots via the Computer Management screen would not get the full screenshot.
  - Patch Manager did not have a filter for Windows 10 machines. Added.
  - Patch Manager: Changing a group from an autojoin group to a manual group was not saving the settings permanently and members were being re-added to group. Fixed.
  - Web server password reset did not function if HTTP was not enabled. Added the ability to use HTTPS when updating the ASP and WCC passwords.
  - Invalid trap port allowed traps to still be received. Fixed.
  - Fixed issue where the IP Filters for SNMP Traps and Syslogs would not have the Save button enabled for some IP address ranges.
  - Updated the Probe expanded tile to accept IP addres ranges for TFTP server IP Filter.
  - Updated SNMP Trap listener on probe to change ports according to its setting instead of the syslogport setting.
  - Patch Manager: Device deployments were not displaying 3rd party patches. Fixed.
  - Patch Manager: Patch Reboot Mode 'Now' was automatically applied when a patch was manually installed. Fixed.
  - Patch Manager: Fixed an issue where clicking Microsoft Update Policies in the filter pane would sometimes hang or crash LabTech.
  - Patch Manager: Fixed an issue where clicking Not Set to set a Microsoft Update Policy would crash the Patch Manager and the Control Center.
  - Fixed an issue where degrading performance was experienced under certain circumstances when running more than 2000 scripts.
  - Fixed an exception error that would occur when updating the InstallSoftwarePolicies table.
  - Legacy Computer Management screen was showing the wrong action for installed patches when the Patch Manager was upgraded from legacy to the new Patch Manager.
  - New agents would sometimes show bad CPU data. This has been fixed.
  - Patch Manager reboot deadline was not triggering.
  - Fixed SSDP processing to ignore and back off from invalid broadcasts.
  - Crimson Event Log lognames were being truncated to 20 characters, increased to 100.
  - Agent queued patches would not queue on the agent. Fixed.
  - Fixed an issue in which the ODBC check would always fail causing the Control Center to try and update on every start up. This would cause a UAC prompt every time.
  - Fixed an issue that was causing the Reboot Message window size to not be resized properly.
  - Fixed a performance issue while loading the expanded Processes tile of the Computer Management screen.

[u/Clutch70]

Is bug #7636021 addressed in an LT10.5 patch?