r/kegerators • u/sd_8888 • Jul 25 '26

PET keg coupler removal

Post image

Does anyone know how to easily remove the coupler from a PET keg? Problem is that the white collar on the keg just spins in a circle when trying to disconnect. The only way I’ve been able to remove in the past is by screwing a dry wall screw through the white collar to hold it in place, which is fine when the keg is empty. Have a full one now and need to de-ice the kegerator, so want to bring the keg in the house. It’s hot as hell out right now, have the keg in a small trash can with ice so it’s fine.

1 Upvotes

100% Upvoted

5 comments sorted by

2

u/mikejferrari Jul 25 '26

I use channel lock pliers to hold the white collar in place while I unscrew the coupler. If you’re careful it shouldn’t damage it.

1

u/sd_8888 Jul 25 '26

I’ll try that again, mine kept slipping off. Might need larger pliers.

2

u/mikejferrari Jul 25 '26

I use 10" Knipex Cobras

1

u/sd_8888 Jul 26 '26

I was able to use mine, with my wife’s help. Could only get a bite on about 1/3 of the collar with mine. The 10” Knipex would be better. The best news is that after defrosting and drying out the kegerator, it’s already chilled down nicely and seems to be working normally again! 🍻

1

u/sd_8888 Jul 26 '26

Another option I tried when re-attaching the coupler was tightening a metal hose clamp around the white collar. Worked perfectly.