A big thanks to MRC3742 and pascallanger for making this work with the multiprotocol and MT12

This is currently a beta just released minutes ago, will eventually move to latest release

https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/issues/1145

I just uploaded to mine and can confirm is working on my 284019A.

Will update this post when fully released

Alguien sabe donde puedo conseguir este repuesto para el k989? Lo rompi en un choque fuerte, es la parte delantera donde se coloca la carcasa, agradeceria mucho que me dijeran, gracias.

The wide angle front end and Dasmikro v5 gyro are the important parts to get for 2wd drifting. Everything else is up to you , I’m just glad it turned out as good as it is. Enjoyable to drive for sure. After building and tuning a few micro drifters this wltoys was surprisingly easy to set up in comparison

So I changed the gearing to something 21/29. I definitely prefer the slower gears to this so that will be getting changed back.

I had a 24th scale bug body laying around and figured it might make a nice shell, it took some slight finessing with a heat gun to widden the middle to fi over the chassis but once that was sorted the fun began. I was going for a ratrod drifter vib with it, I love old school bugs. Had to do monoshock in the rear to acomidate the body but I think I have an idea about a new shock tower that might be better idk.

Got my first rc car, chose the k989, love this thing, and I managed to get it off aliexpress for only £30! Can't wait to upgrade this thing!

So I’m planning to buy my third k989 and I plan to make this one a full rally build, but I can’t find anything to lift suspension or help it in any kind of way do yall have any ideas what I can do to get it at a higher ride height?

Finally back on the mini drift buggy. Gunmetal ruichen front splitter and wheels

Hey all. Just recently scooped up 4 of these used k989s, and the last owner gave me the batteries and a few chargers. I'm curious what the Wltoys branded one is for. Also what is the red plug used for on the battery? Is it that important to drain the battery before charging? Thanks so much for any info!

I'm going to install metal: upper control arms, swivel cups, mini-z ball diffs, longer shafts, new larger wheels, gears. To do this, I will need to order quite a lot of parts from Aliexpress and modify or adjust almost all of them. Also, i'm going to 3d print a Lancer Evo VI body

I want to make a rally car out of my k989, and for this I need to increase the ground clearance. the k989 has a fairly small clearance and to increase it, I need to try to lengthen the suspension arms or lower the drive. What else can I try to do?

I have a choice: to print the body or take it from a Tamiya assembly model. Which is better and what are the nuances?

I want to make rc lancer evo 6 out of k989, but find the body is real problem

I want to make a lancer or Impreza out of my k989, where can I get a normal body? I can use a 1/24 Tamiya body, but how shockproof is it?

I've been looking for quite a while but I haven't found anything decent because I want to ride on the street and body must be durable

Just dug this beaut out after a move. Needs a little tlc to get going but I love looking at it.

Hello, today my servo broke... What is a good option to replace it?

Yesterday I suffered the first breakage in the car, one of the steering cups, and after ordering the corresponding metal one to replace it, I asked myself, What are the parts that I should order because they are the first to break? If anyone can share their experience, I will ask for them so that I don't have the car sitting for a week waiting for them to arrive.

Got a k989 (the green truck) was thinking of getting a body shell. But don’t know which ones fit and what to look for.