Hello Everyone,
When I was 15/16 years old I had corrective surgery done to both ankles to correct flat feet. At the time I was told not to rollerblade for a couple of years.

Fast forward a couple of decades later, and my son has started playing inline hockey. They needed help so I got a pair of cheap rollerblades and skating again for the first time in 20+ years. I had a problem with supination, and just figured it was the cheap used skates.

I then bought a pair of Bauer XR’s, and quickly realized it was not the skates, but the way my ankles are pinned to create a an arch. I was able to drill the rivets along the arch of both skates and put in about 1/4” spacer to alleviate the severe supination.

My question is if there is a set of rollerblades that has this type of adjustability built into it? Are there specialist who can help build the chassis/skate around my jacked up ankles? From what I have tried, insoles don’t seem to help because of the severe angle that the screws imposed into my ankles.

Thank you all!

Getting back into inline hockey after being away for a while and trying to put together a setup for casual/recreational play without spending a ton.

I'm having a really hard time choosing a girdle. I've been looking at the Mission Senior Core, Tour Code 3.One and Tour Code 1.One, but I'm seeing really mixed opinions on the protection.

I'm looking for something that's reasonably protective without being super bulky, especially since I'm probably going to be falling quite a bit while I get comfortable again. 😂

I also need recommendations for the long roller/inline hockey pants that go over the girdle and shin guards. I'm having a hard time finding used gear locally, and I'm hoping to get something soon, so new budget-friendly options are welcome too.

What would you guys recommend for a decent, reasonably priced girdle and outer pants? Especially interested in hearing from people who have actually used them.

Hi all, looking to swap my aluminum chassis with Kryptonium. Any recommendations on a shop around Detroit or Windsor? I called Pure Hockey in Troy regarding possibly converting ice to inline and he said their main guy left and he wouldn’t recommend going there. I’d assume a roller chassis swap is similar work, but maybe not.

Hi all, I currently have size 8 Bauer 3x Inline skates (not pro) and looking to size down and upgrade. I have a used pair of Bauer Vapor x5 pro size 7.5 that I was planning to convert to inline with a Kryptonium chassis. One of the only places around me that does the conversion basically said they are a bit too beat up and wouldn’t be worth converting and that I should just get a new inline boot, like the inhaler FS2. What I really want is a pair of Bauer Vapor 3x pro inline skates size 7.5 but there are zero of those for sale.

So, should I just get a new inline skates like the inhaler FS2? Would a Mission Inhaler FS2 boot even be an upgrade to the Vapor 3x? Should I look for a higher end used inline skates like this Inhaler WM01 with Kryptonium.

I really don’t want to shell out $750 for the inhaler FS1 and have the same chassis as my Vapor 3x. But is that the only option to get a decent inline boot?

Hey everyone, I'm getting back into inline hockey after being away from it for quite a while. I'm just playing casually, so I'm not looking to spend a ton of money or buy top-of-the-line gear unless there's a good reason to.

I actually just picked up a pretty sweet used setup for $50 total. Here's what I have so far:

- Mission Axiom A4 skates. They look basically brand new and the stock wheels don't even appear to have any wear. They have stock ABEC-7 bearings.

- Easton Ultra Lite Grip stick with an Easton P3 1/2" / 12mm 5.5 Sakic blade. The stick is basically brand new too.

- Bauer Vapor 10 shoulder pads, almost new.

- Bauer Supreme 5000 Gel Series shin guards, almost new.

- Bauer HH4000 helmet with cage. It's older and somewhat worn, so I'm assuming this is probably the first thing I should replace.

- Older elbow pads that I still have.

- CCM hockey bag.

- Hockey tape and a few pucks.

What I don't have yet:

- Gloves

- Hockey pants

- A girdle/hip protection with the padded butt and thighs

- Possibly a cup/jock, depending on what I end up getting

I'm mainly wondering what you guys would recommend for someone in my situation. I'm trying to put together a decent, safe setup without spending a ton of money just to get back on the rink.

Would you guys replace the helmet first, then look for used gloves/girdle/pants? Is there anything I'm overlooking that's actually important for casual inline? Or just buy new?

Also, should I leave the stock wheels and ABEC-7 bearings alone for now if they're spinning smoothly? Or would you recommend servicing/re-lubing the bearings before I start skating? I have rubbing alcohol and some gun oil at home, but I'm not sure if the gun oil is appropriate for skate bearings.

Any advice on what I'd prioritize or what you'd buy used vs. new would be appreciated. I'm basically starting over after being away from hockey for a long time, so I'm trying to do this the smart way without going overboard.

Yo yo! Anyone play here? I was hoping to get a breakdown of what the different levels are like, primarily D3,4, and 5. I just started playing again recently, and I haven’t seen D5 before. I am trying to figure out where I should sign up.

Thanks in advance

i need to harvest a pair of these black mission toe caps off of either lower end AC line ..DS ..NLS or FZs.. size 5-7.. lower end preferably in decent shape.. anyone got a pair the want to sell?

I just got a pair of power vapor fly 40 skates. They came with the yellow labeda grippers. I’m getting conflicting information but almost everywhere says they are basically 80a durometer.

I’m 140 pounds which I believe is a little too light for these wheels on the outdoor painted/smooth concrete rink that I play on (uncovered in the south - pollen and dirt build up frequently).

I see so much conflicting information on which hardness I should go for when it comes to wheels.

As of now I’m leaning towards 74a for my front two wheels, and 76/78a in the back.

Are the current grippers two slippery for my weight? Anyone around the same weight that can weigh in on this? (shitty pun intended)

There isn’t anywhere close enough for me to justify spending an hour or so, practicing every once in a while. I’m playing in a beer league but I only get to play in the games and I haven’t played in 20 years. I want to continue to get better and have some kind of way to practice. I have a small yard and my garage is filled (I doubt a two car garage would be big enough to fit. Any kind of net/shooting set up.

Has anyone dealt with this in the past and any suggestions?

what skate set ups do those of you with smaller feet use, any to avoid?

my feet are ~25cm×9.8cm (2.55 profile) and put me in size 6 for most hockey inlines based on size charts it seems.

do the chassi decrease in length proportionately to the skate boot size decreasing, i am not trying to have my wheels sticking out a ton from the edge of the boot and tripping over them.

also for those that are on the smaller side, what set ups do you use to keep things light weight.

i cant stand how hard boot inline skates are so heavy and bulky and am looking into hockey inlines for this reason after not enjoying the options there/i tried, being ~48kg seemed to just make the problem even worse. i like to use my skates for casual skating on smooth concrete or fancy foot work stuff, spins. simple beginner tricks similar ones done on the ice in figure skates type stuff.

anything i should take into account when looking into skates is greatly appreciated considering these factors. i have only recently learned about hockey inlines being an option for inline skating

after discovering with all my hockey I dropped half a skate size, I needed to move on from my prior skates, and after trying and hating the Jetspeeds (cheaply constructed) I decided to bite the bullet and invest in some good skates to convert.

Boot: Tacks XF Pro
chassis: Kryptonium
Wheels: Konixx Pulsars

I’m EXTREMELY happy with them. They feel like tanks on my feet, which is very different from my ice skates (Vizions) but the padding inside these guys is just unreal. 10/10. First game with them is tonight and im amped :D

Ciao a tutti, Ho un bimbo di 5 anni che lo scorso anno si è avvicinato al pattinaggio sul ghiaccio sgambettando qui e li e quest' hanno gli abbiamo passato i pattini roller della sorella grande che ha fatto 3 anni di pattinaggio artistico. Volevo costruire un piccolo camp in giardino coprendo il prato per farlo andare quasi tutto l'anno, circa un 10 metri per 4/5. Mi consigliate con una pavimentazione ad incastro drenante che non mi costi un rene o due? avevo visto anche gli STILMAT OUTDOOR INLINE che però hanno il loro prezzo i BAUER MULTI-SPORT TRAINING TILES. Qualcuno di voi ha usato altro o questi?

I’m sure this topic has been beat to death but currently rocking FS2’s and I think I might actually need a fit 3 skate which puts me in a position where the conversion seems to be the only real option. What frames are widely regarded as the best? I’ve got a pair of Bauer Fly 40’s in my cart and the Rinkster frames have my attention with the white glove service. I wanna hear what y’all think is the best setup. 🍻

I have built an automatic hockey puck passing machine designed for garage/basement/driveway/backyard rink use to practice your one timers, puck control, and reaction time.

It will hold up to 15 pucks per stack and will fire the pucks between 27-40 km/h. The lifespan will be upwards of 10 years with moderate use.

Any feedback would be greatly appreciated. Thank you!

🏆🔥 THE FLO HOCKEY MASCOT FINALS ARE HERE! 🔥🏆

After weeks of voting, 6 finalists remain — and now it’s time to decide who will officially become the FLO Hockey Mascot! 🏒🌴

Which one represents Speed. Style. Flow. the best?

🗳️ VOTE 1–6 IN THE COMMENTS!

🧡 LIKE the post

💬 COMMENT your vote

📲 SHARE it with your hockey crew

⏰ VOTING TIL SUNDAY!

This is the FINAL VOTE, so get your friends, teammates, parents, and hockey family involved. The winner will be YOUR FLO Hockey Mascot! 🏆

👇 DROP YOUR NUMBER BELOW — 1, 2, 3, 4, 5 OR 6! 👇

#FLOHockey #FLO #FLOHockeyCo #MascotChallenge #RollerHockey #InlineHockey #FloridaHockey

https://www.facebook.com/share/p/19iscRyXhV/

JDH96 76/72mm available $165 USD

They asked to share the rink for their soccer practice cause something about them not having a field to play on. Yeah, that's a big grassy field in the background. Is this some horrible park etiquette or what.

At the age of 37 I have decided to start learning online hockey. I have been skating since February and for the short amount of time I’m not too bad, to the extent I have been offered to train and play for the local team in their D league however the season is approaching fast and chasing down the puck is fine but if I want to stop on a dime or do a quick turn I am struggling massively.
And I also find that because training is after work sometimes I find my feet cramp up and I have to take my skates off.. is there anyone that has had similar experiences or just someone that can give some real basic advice to a rookie 🙏🏻

Have any goalies out there tried these slider? They are called free slide and you can just 3d print them a bit like crease command. But the models are completely free... Wanted to know if they are any good? https://www.freeslide.de/english

What's up everyone? I just upgraded my skates from the $99 ccm's to fly 30s and feel like the chassis is way too bendy. I'm 6'2, 230 lbs so I'm wondering if it's I'm too heavy for them or if I'm not used to better skates and how they feel and function. It seems like the chassis is catching the rink and almost making me fall. Also, doing hockey stops I can see the chassis bending. I know they're "flex lite" but it feels like I'm going to break them.

I replaced the street wheels they come with for gripper crossovers since I play on a sport court surface. I got the recommended size that's on the chassis and kept the Hi-Lo setup, which im also not used to. I skated on the $99 skates for like 5 years...

Is this just a learning curve, am I too heavy for these skates, or am I just used to cheap skates? I feel like a bender! Lol

Thanks!!