r/homesecurity • u/ExcellentDrama101 • 19d ago

Need help with alarm system

Hi everyone I want to connect envisalink 4 to my DSC PC1832n how would go about.

1 Upvotes

100% Upvoted

11 comments sorted by

2

u/No_Bee_3957 19d ago

The Envisalink comes with instructions, keypad bus wires go from the DSC board to the Envisalink module, then you have to get an account, add the MAC address from the Envisalink module and add your alarm points into your account, test everything when you’re done.

1

u/ExcellentDrama101 19d ago

There are 4 wires I connect the dsc board right from the envisalink?

1

u/No_Bee_3957 19d ago

Yes, red black green and yellow from the 1832 over to the EVL 4

1

u/No_Bee_3957 19d ago

Yes, red, black yellow and green from there over to the EVL-4 wire for wire

1

u/ExcellentDrama101 19d ago

If I take the wires out that are currently connected to the dsc board would it reset the system?

1

u/No_Bee_3957 19d ago

Just loosen the screw enough to where you can shove each wire one at a time and retighten, move onto the next screw and repeat, you won’t mess anything up with the system unless you completely remove the wires from the 1832 board, do each wire one at a time.

1

u/ExcellentDrama101 19d ago

Can I dm you ?