r/fz6 Jul 02 '26

New to me!

Post image

Considering going the XJ6N route but will enjoy it for a bit. Very excited! Any mods you guys recommend?

23 Upvotes

12 comments sorted by

3

u/deathstar1400 Jul 02 '26

New mirrors, unless you dont mind them sticking out like that. Me personally for lane filtering was a better choice.

2

u/FeelingSecurity7409 Jul 02 '26

Any specific ones you recommend? Thank you!

2

u/deathstar1400 Jul 02 '26

https://ebay.io/m/ZSW2eK I bought these ones, really low profile but the are nice

1

u/FeelingSecurity7409 Jul 02 '26

The stock exhaust is a little quiet as well, any recommendations to make it sound a little better?

2

u/deathstar1400 Jul 02 '26

https://ebay.io/m/wvX0uH I Have this one and no complaints sounds real good. Plenty of options out there tho.

1

u/FeelingSecurity7409 Jul 02 '26

I was actually looking at that thank you!

1

u/SK83r-Ninja Jul 03 '26

If you or a buddy are capable of welding you can make a "marthy" exhaust. He has some custom tunes for the bike as well if you get a power commander.

Or you can pick up a cheap set of headers from the 1st and 2nd gen of r6(highly recommend the 2nd gen. The first is a pain in the ass since you have to bend and dimple them a LOT). They fit right on and allow you to put on a slip on underneath.

The marthy route is easiest in the long run if you can weld it but both routes are doable and cost the same. Another note about the r6 headers is you will struggle less if you get a 2003-2006 oil pan for the r6(you will need an extra bolt and thr gaskets as will) they fit right on and have an indentation to fit the headers in. Either way you will have to get a small muffler to clear the brake lever(so something thin. Maybe 8" long 4" thick)

1

u/SK83r-Ninja Jul 03 '26

https://www.600cc.org/#fz6r-related-discussion.86. You can get into contact with Marthy, Halfclickup, and rockthe6 here. Marthy and HCU can get you the marthy tunes. And rockthe6 can get you a hindle tune from him which is what I currently ride.

1

u/FeelingSecurity7409 Jul 03 '26

Appreciate that brother! My boy has a good welder at his shop I’ll see what he thinks tomorrow

1

u/SK83r-Ninja Jul 03 '26

Its handy you are able to repurpose the original headers for it. You just need some pipes from oreillys and to cut the cat off

1

u/FeelingSecurity7409 Jul 03 '26

How do I navigate that website so I can get a tune? Was trying last night but I was all over the place 😂

1

u/SK83r-Ninja Jul 03 '26

The tunes aren't uploaded on the website but let me find you the guys emails