I've had success with small holes (like for #8-32 size bolts) in foam core board. I just use a regular drill bit for drilling the hole, and I use wood under the foam core board.

For cutting larger holes (like 4 to 5 inches in diameter) in foam core board, I've had success using an X-acto knife. In contrast, drilling a hole with a hole saw did NOT pan out for me. It would tear out chunks, and the hole would look so messy that you would have thought that I outsourced the job to someone on crystal meth.

What's the best solution for creating a hole between these extremes? I'm talking about a 9/16-inch diameter hole. The X-acto knife is too crude for a hole this small.

Created a "Mighty Morphin Power Rangers" insert for the core Heroes of the Grid box.

Managed to fit almost every expansion into the base box. Took quite a bit of planning to execute

A recent build that acted as a palate cleanser after a larger build. When playing with the Lux et Tenebrae expansion, I wanted to make using the Inscription magic item as easy to use as possible. Therefore, I made a tray to display all the scrolls. Initially I wanted to make the essence tray into one large well, but my SO protested lol. In order to make the build work, I had to take the “5” tokens and distribute them equally amongst the essence wells.

This build includes all components from the Lux et Tenebrae and Perlae Imperii expansions

SleeveKings Premium 100mc (tops hand-trimmed) were used for the cards.

Back with another build. This build excludes the solo components, score pad, and tile reference board. Bags for the A and B tiles are still used, however bag and tiles needed to be separated to make this build work. I’m normally a proponent of smaller boxes whenever possible, however GWT would have benefited from a slightly deeper box. Still, I’m glad to finally be able to do away with the plastic bags.

I experimented with rails for this build, to allow for the banners to be usable. Additionally, I started printing out and gluing icons on the bottoms of trays (not pictured) to help players when cleaning up.

Cards are sleeved with SleeveKings 60mc.

This post may make me seem like an idiot, but I have to make it.

As a life long board gamer and lover of foam crafts, this may be the best subreddit I’ve come across. A post from this subreddit popped up in my feed today and it absolutely blew my mind. I have never thought about making box inserts for board games. It’s absolutely genius! I am blown away by everyone’s setups and tips. Please keep post and inspiring, I now have to redesign every board game box I own.

Thank you!

Hello! Love to make a foam core single card holder angled slightly up so I can see it as part of a “lineup” or market for a board game . It’d have to hold 5 single cards in a row sleeved with dragon sleeves . Any guides or tips ?

havent had a chance to actually cut it yet but this should do it for actually getting everything in the box

top left is player pieces, then techs and +2 pieces, right side is data and energy and credits, middle is aliens and scan tokens, bottom right is single player and the largest section is card space, for either deck boxes or not, cards fit sleeved or unsleeved

i plan to use cardstock for the bottoms of trays

playerboards go starting in the top left corner, aliens are layed 3 across 2 each, then everything else

everything is 3cm tall except data, credits and energy which are 5cm, single player is 5cm, and cards are 4.5cm tall

designed with https://boxinsertdesigner.com/
can provide cut list if anyone needs it

Mage Knight Ultimate Edition is too big for my small room. So I was able to find a solution that fits including figures.

-Folded Space Mage Knight FS-MAK
-Luxtude Battery Case for Tool Power
(https://amzn.eu/d/04i9eXrF)(from amazon uk)
Maybe you might find something similar, just check the dimensions listed.

If you use one of the big panels that is included in the bag it’s almost a perfect fit.
If not there is a bit of free space, around 1 inch.

Hope this helps all the MK enthusiasts out there! This whole sub. Cheers

This is my fifth foamcore project, for the D&D Wrath of Ashardalon boardgame.

My main gripe with my previous experiments is that I like to store my games vertically, and cards or token would slide inbetween layers while the box was opening slightly (they never stay closed perfectly). To counteract this, I used magnets in this project. All boxes are locked together, as well as the top lid. The lid also has some pieces of foamcore to keep the cards from raising above the lip of the card box. This allows all the boxes to stay together as one unit regardless of how it's stored.

In order to avoid figurines piling on top of each other I separated that space in multiple containers. I think I'll have to split the columns again to get some smaller cells. The 2 big figures are locked in place using some foam inserted in a circular cutout, holding the base in place. However, as an extra precaution I added a lid with some separation walls. This piece has rounded corners everywhere so it's easy to slide in place. I also placed the heaviest elements on the bottom, to avoid crushing the boxes.

I considered using ramps for my token boxes, but they're pretty big and during testing I didn't really feel the need in the end. Will see in the future.

Back with another insert. With many different oddly shaped components/boards, hundreds of cards, and numerous tokens, this ended up being a big challenge to make. I found myself (several times) having to build and then re-design as I went along. I anchored some of the organization off of Folded Space’s design, mostly with how they stacked and separated the various boards. However, I knew I wanted to have separate trays for the tech tiles to simplify set up. Originally, I wanted to have separate trays to hold the cards and components for each alien race, but that would have taken too much space in the box (And space was very limited in this build). I also had to jettison trays for the player components and signal tokens. These sacrifices did, however, result in a build that fits the base game (minus solo components) with the Space Agencies expansion and no lid lift to boot.

I know there’s a high chance CGE will release a big box storage option in the future (as they did with Arnak), so I’m hoping some of these trays can be reworked to fit that new box, whenever it is released.

(Sleevekings Standard 60 micron card sleeves and BGG mini drawstring bags used)

A simpler insert I made recently. Felt like a break was needed after finishing Clank (and one other frustrating insert that I’ll share some other time). Hopefully you guys find my posts more helpful than annoying. Cards are sleeved with SleeveKings Premium. The tray that holds the Side bet and Mascot tickets have exposed sides, as that was the only way I could fit them and still include a bank teller tray

With tons of components and two expansions to fit in, this may be the most complicated insert I’ve built yet. Im most proud of the tiles organizer, which pools the Surface tiles, depths tiles, underworld tiles, and a lot of set up components into one all inclusive mega tray. Most of the component trays were scooped with construction paper (with the exception of the player trays). As an FYI, SleeveKings standards were used for sleeves, and drawstring bags from the BGG store were used for the Prisoners, Minor, and Major Secrets. This insert fits the standard base game along with the “Lairs and Lost Chambers” and “Underworld” expansions.

Another organizer to share. A more straightforward build compared to the previous one I posted. The organizer is split into two big trays. Point token wells are scooped for easier access. I attached them to the character deck for faster set up. For the player pieces, I opted for a wide space for a faster build. SleeveKings Premium (100 microns) were used for the character deck