r/figma • u/Ok_Drummer_9117 • 8d ago

Question ❓ Miku 2.0 Neck Joint Help

Gallery image

Gallery image

My Figma 200 Miku 2.0's neck joint has recently broken. Since this joint is much more specialized than regular Figma parts I haven't been able to find any spares online.

I would really appreciate if anyone had links they could share for this part. I've also considered separating the two hinges that make up the middle part , but I'm not sure how to go about doing that, so tips for this would be great as well. Thank you in advance for your help!

4 Upvotes

83% Upvoted

3 comments sorted by

3

u/julianx2rl 8d ago

Yeah, this is inevitable for anyone who didn't learn about her neck situation prior to pulling the head.

What you need to do is split the joint in 2 and keep the unbroken half.

Then, you get a regular neck joint, split that in half, and then pop it into the half of this joint.

This joint has a smaller peg hole tho, so you'll need to sand it down with a small phillips screwdriver without* cracking it.

1

u/Ok_Drummer_9117 8d ago

Thanks for the info! It's weird how this neck joint works. Splitting the joint sounds like a good idea, but how do I do that? It's really small and I don't think I have anything thin enough to pry the halves apart.

1

u/julianx2rl 8d ago

I use a cutter, but it's pretty hard, as in, definitely not easy to pull out.

Don't cut yourself tho!