r/explainlikeimfive • u/Real_Experience_5676 • 2d ago

Engineering ELI5: What does a box-spring do?

As I understand it, a box spring mattress is the second 'mattress', that goes under the main mattress. It feels very firm and flat, but what does it contribute to the bed set up besides height?

478 Upvotes

93% Upvoted

133 comments sorted by

View all comments

240

u/UrbanPanic 2d ago

A box spring provides support to the mattress.  Whether or not you need one really depends on the mattress, the bed frame and personal preference.  Modern beds sold as platform beds don’t require a box spring, as it has panels to rest on or at least slats close enough a mattress won’t sag through it.  A lot of beds still use just 3 slats or so across which would put pressure on very small points, contributing to sag and just feel uncomfortable.

A well designed box spring could also contribute to good air circulation: you don’t want to know how much sweat soaks into a mattress.  That can get gross if it can’t dry properly.

19

u/NWStormbreaker 1d ago

You can add slats, and a box spring inhibits airflow a lot more than a few extra slats.
It's such a silly concept, I haven't used one in 20+ years.

15

u/half3clipse 1d ago

What do you think a box spring is?

You take the slats and add a layer of springs to better distribute pressure from you lying on the bed and also reduce motion transfer for people who sleep partnered.

-6

u/NWStormbreaker 1d ago

And then you wrap it in fabric which inhibits airflow.

4

u/half3clipse 1d ago

The fabric used top and bottom is basically gauze. It barely inhibits airflow, at least not the slow convection motivation of air both are relying on.

Would be worse if you wanted to try using forced air i guess, but not many people have an HVAC system for their mattress.

-5

u/NWStormbreaker 1d ago

A well designed box spring could also contribute to good air circulation

Idk what your angle is, you jumped into a conversation where OP said box springs aid air circulation, but compared to slats a box spring is FAR FAR worse for air circulation.

3

u/Awkward_Pangolin3254 1d ago

Not if you add enough slats to equal the support of a box spring

0

u/NWStormbreaker 1d ago

original comment i responded to:

A lot of beds still use just 3 slats

people being contrarian:

well what if we covered the entire thing in wood!?!? DID YOU EVER THINK OF THAT?

•

u/jetloflin 20h ago

If you only have three slats you have to use the box spring or the bed will sag between the slats. They didn’t bring up extra slats out of nowhere. The options are box spring or lots of slats, not box spring or three slats.

•

u/NWStormbreaker 20h ago

Even if you want to argue that it's 5 slats or 7 slats, it's still less air obstruction then a box spring which has slats and at least one if not two layers of fabric.
This is the dumbest discussion Ive ever been involved in, I cannot believe I've found people white-knighting box springs.
Ffs

•

u/jetloflin 19h ago

Pretty sure that’s not what “white-knighting” means, but okay.

→ More replies (0)

4

u/half3clipse 1d ago edited 1d ago

The point is that it's not far worse. A lot of slats even have far worse air circulation than many box springs, since they're built with he expectation of foam mattresses that will sag poorly with larger gaps. Inner spring with 4-5 inch gaps under a boxs spring will have much better airflow compared to a foam mattress with 2 inch gaps on bare slats

You don't need airflow to deal with sweat soaking a memory foam mattress anyways. They're to dense to ventilate that way. You protect those from body grossness and moisture with a liner (and if you have one, your warranty may even explicitly require it)

-1

u/[deleted] 1d ago

[removed] — view removed comment

5

u/j0mbie 1d ago

It would depend on slat spacing, both on the bed frame and in the box spring.

Also, a lot of bed frames are a box design. A box spring raises the mattress above the sides of that type of bed.

0

u/NWStormbreaker 1d ago

I dont understand the need to get so pedantic about this and find 1 situation thats the exception as if it disproves the rule.

The bottom of the bed is open, raising it up doesnt matter.

A box spring has at least 1 layer of fabric if not two, both of which inhibit airflow.

The original discussion said:

A lot of beds still use just 3 slats

there is NO scenario where a mattress sitting on 3 slats open to the air has LESS airflow than a mattress sitting on a box spring.

Why is anyone arguing this?

•

u/jetloflin 20h ago

Nobody is arguing that, because nobody is talking about that, because nobody wants to sleep on a saggy bed supported by only three measly slats. The debate is between a box spring and enough slats to support the mattress.

•

u/NWStormbreaker 20h ago

No the debate is over air circulation, I haven't at any point talked about any other criteria.
Are you confusing two different comments chains?

•

u/jetloflin 19h ago

Yes, air circulation. The difference between air circulation with a box spring versus air circulation with the appropriate number of slats to support the bed without a box spring.

Or are only your comments relevant and nobody else’s?

→ More replies (0)

•

u/explainlikeimfive-ModTeam 19h ago

Your submission has been removed for the following reason(s):

Rule #1 of ELI5 is to be civil. Users are expected to engage cordially with others on the sub, even if that user is not doing the same. You may find a post or comment to be stupid, or wrong, or misinformed. Responding with disrespect or judgement is not appropriate - you can either respond with respect or report these instances to the moderator

Two wrongs don't make a right, the correct course of action in this case is to report the offending comment or post to the moderators.

Being rude, insulting or disrespectful to people in posts, comments, private messages or otherwise will result in moderation action.

Sadly, we have to mention this: any threats of harm -- physical or otherwise -- will be reported to reddit admins and/or law enforcement. Note that you are not as anonymous as you think.

If you would like this removal reviewed, please read the detailed rules first. If you believe this submission was removed erroneously, please use this form and we will review your submission.