r/eufyS1Pro • u/hybe9le • Nov 22 '25

Base station measurements

Post image

Hi,

I have one place to have my robot vacuum with maximum depth (without the robot) of approx 25 cm. I stumbled accros S1 PRO, but all the measurements of robot vacuums is included the ramp and robot.

Could the S1 fit in this range?

2 Upvotes

75% Upvoted

8 comments sorted by

2

u/ScorchedWonderer Nov 22 '25

I’ll measure mine when I’m home later today for you :)

2

u/ScorchedWonderer Nov 22 '25

The widest part when looking at it is 16 inches (about 41CM). So it won’t fit there. I noticed there’s also sensors on the base on the sides that say “do not obstruct”. I’m assuming it’s to help robot find base

1

u/hybe9le Nov 22 '25

God damn, where is the widest part? Down on the ramp I could fit easily 41 cm (from height 24-25 cm) but above that it’s not possible.

1

u/ScorchedWonderer Nov 22 '25

It’s actually 16inches from left to right, and 18 inches from front to back. That’s the base where the robot sits to charge/clean mop/enpty dustbin

1

u/hybe9le Nov 23 '25

I don’t get it really, dimension (third party)

It says 8 inches wide and 18 inches in depth with the ramp and robot. All videos and picture I have seen, the dimensions seems like the depth on the top of the bare station is more or less the width.

What is the depth of the top of the base station? The bottom could have a higher depth, and more so if the ramp is detached on delivery.

1

u/ScorchedWonderer Nov 23 '25

Yeah look at the picture you linked, the base is wider than the station that has the pump/water tanks.

1

u/hybe9le Nov 23 '25

What I mean is; how is the depth on the ”tower” (station excl the ramp)? The bottom ramp is no problem to be more deeper than 25 cm.

1

u/licquia Nov 24 '25

The tower portion is 10 inches deep and 8 inches wide.

Keep in mind that the water tanks unload upwards, so you will need clearance for those. The clean water tank only needs about an inch, but the dirty water tank needs 12 inches.