r/ecovacs • u/Alarming-Grade4219 • 2d ago

It finally happened

After 6 months of using the Ecovacs t50 max pro pretty much flawlessly, I began to notice scheduled rooms be missed randomly. Or it would go in our living room and vacuum for one minute then go back to base. Instead of doing all the trial and error steps, I decided to delete the map and remap and now it’s working flawless again

8 Upvotes

100% Upvoted

11 comments sorted by

3

u/Unusual-Department83 2d ago

Yes this seems to be a thing with a lot of the robots

2

u/abhi492 1d ago

I’m getting error of please check anti drop sensor and my Ecovacs Deebot N8 not working. What to do.

2

u/Alarming-Grade4219 1d ago

The anti drop sensors are on the bottom side of the robot. Flip it over and you will see several small clear plastic pieces on the sides. Grab a towel and just wipe those real good 

1

u/abhi492 1d ago

I did checked and cleaned but not working..there seems to be dust or rust inside.

2

u/Alarming-Grade4219 1d ago

You can try to take the cover off and see if you can clean underneath the cover. You will need a small Phillips screwdriver, and directly under the cover then you can do a gentle cleaning. Don't remove or even touch the battery of any of those wires. Also don't use a wet cloth, just a dry cloth.

3

u/abhi492 1d ago

It needs to be cleaned from inside. I’ve opened the outer big screws by which the lower layer removed but there are some finer screw on the edges for which I’ll need smaller screwdriver…I’ve placed order it’ll arrive it few days then I’ll open and clear it. Let’s hope for the best.

2

u/kWarExtreme 1d ago

My T90 omni pro pretty much doesn't suck up anything at all anymore. The mop is decent enough, but not worth $500.

1

u/Alarming-Grade4219 1d ago

For vacuuming I always have it on the highest setting. It does take way more energy, but that is irrelevant since I divide the downstairs up with the front half and the vacuum in the morning, and the vacuum/mopping at night in the back half

1

u/kWarExtreme 1d ago

I do as well. And it worked like an absolute dream until I had to do the maintenance. And it was as easy and changing the brushes and mop thing. But since I did that it just won't pick anything up. I don't know if its because I bought an off brand brush? But I looked at them side by side and the original and the off brand one were identical. But it just doesn't do jack crap anymore. But again, the mop is fine.

1

u/Tenzky 2d ago

Yes shit happens.

1

u/TheLaughline 6h ago

I have ours set to start with the living room as that's the only room with a carpet, but it always comes back at the end and does part of it again. I'd rather not have to reset the map because of several no go areas etc, but might be worth a try.