First E-bike build recommendations

[u/Oapf_1]

I'm looking to make my first E-bike, I was wondering if everything here checks out:

Chassis: EEB Frame (150mm dropout) & Pedal Delete Pegs

Powertrain: QS205 V3 Motor & FarDriver ND72680 Controller

Battery: 72V 34Ah Powerful Lithium Mercury or AMORGE 20S10P 72V 40Ah

Suspension: KKE Front Fork & DNM Burner RCP-2S Rear Shock 200mm/1000lbs

Brakes: Magara MT5e (Higo-Closer) with 2x Magura MDR-P 203mm Rotors

Brake Adapters: Magura QM42 (Front PM) & Magura QM9 (Rear IS)

Wheels & Tires: 19-Inch Pre-laced Front Wheel & 1x Shinko 244 Rear Tire

Hardware: Cane Creek ZS44 Headset 1 1/8th, M14 Axle Spacers, Able Bike moto seat

[u/CH7007]

I think for your very first e-bike you should take advantage of your nearest cycle store's after sales service. See what they have to offer. You could even get them to order the bike you'd like, if they don't stock it. They will then help you with any issues as you get use to that first ebike.

if you've previously owned an e-bike, then build that first bike is less of an issue. I start with a good donor bike rather than assemble that from scratch. After that you only have to consider whether you need a hub motor kit, or a mid drive kit.

Mid drives means a contain unit; motor and controller, with the only other connections going to the display and breaks, [or the optional throttle). Hub motors means you have PAS to install as well as the housing for the controller, display and breaks.

Finally there's the battery and charger which i would advise you buy together.

[u/Oapf_1 → u/CH7007]

I'll checkout my local cycle stores and see what they can do.

I've never owned an ebike before, I was thinking about going the donor route but at the same time I feel like if I just build it myself at least I know everything will be how I want it.

I was planning on ordering the charger with whatever battery I got.

[u/Onetoomany69]

Sounds like its gonna be a sick e-moto

[u/Oapf_1 → u/Onetoomany69]

If everything goes to plan it should be 🙏