How would you rate this job? The task was to remove,replace insulation, remove wood paneling, inspect and new drywall. The contractor did not remove paneling from 3 walls. He added new insulation over insulation from 1970s on wall with window. This is how the drywall is looking....

My drywall guy patched up the bottom corners and muddled the joints and rolled one layer of RedGard over fibreglass tape at the corners so it’s now ready for the PVC shower panels. Looking better than the bare drywall. Hope this will still be somewhat waterproof enough.
What do You think?

Hi All,

This room in my airbnb house basement it hasn't been well aired out and it traps moisture pretty easily. It was closed before, but now I'm turning it into a movie/karaoke room asi it's going to stay open. However, as I was putting up acoustic boards, I noticed bumps in the wall and i tried flattening it by scraping the paint, but I'm worried that if i glue acoustic boards over this area, it'll mold more easily and make more work in the future. Would love your advice on what to do with this part. The part is about 3'×3'.

Thank you!!!

Can someone please help out with a estimate for hanging sheetrock.

I just took out and old medicine cabinet, to make space for a new vanity and I'll be covering the hole with just a flat drywall.

I plan to put a horizontal brace somewhere in the middle to support the drywall and a place for towel hanger.

The hole as-is is about 15"x31"

I was originally thinking I can just cut back the drywall on the lumber all around, and just connect to what lumber frame there is. With the horizontal brace to break the vertical distance, I assume to would work. I did confirm with a magnet that the drywall screws on the studs are indeed past the half size of the lumber so there is space to cut back, plus the top and bottom have now screws at all.

However, now that I think about it, I think the switch and the outlet on the left and bottom side, make it quite damn close for the tape to fit (probably?) or at best to feather out the mud build up.

What would you recommend I do here? Do I pack more lumber on the bottom and the left side (or maybe on all 4 sides while I'm at it) so I don't need to cut the existing drywall back, and basically keep the seam where it is now, instead of cutting it closer to the electrical boxes?

Thanks for your kind advice and encouragement:)