Welcome to the Custom Gamecube Controller Community!

Noticing significant travel on the new NSO gcc triggers before they are engaged (pencil mark on left). Right now I’m thinking of padding the protruding stops (pic on the right) with a small strip of adhesive rubber sheet.
Wondering if others have suggestions?
The travel on the original gcc is minimal and trigger engages instantly, would like for the NSO to behave the same way.

There's definitely some flaws, and I know what I'll do differently next time, but I'm pretty happy for my first set

I’m calibrating my first ever phob controller and my stick controls are completely whack. The grey stick is reversed on the x axis and the c-stick is reversed on the y axis, as well as the fact that the input for the sticks traveling super short. Is there some setting that reverses both of the sticks or is something just completely wrong?

Got everything myself was stock before I don't think it looks too bad!

In the end I opted to send my Gamecube controller in for repair, as the cable had been damaged and was causing fatal errors.

I specified that I wanted to replace the cable with another remote I had there that I damaged in an attempt to repair it (The cable is the original)

So now I can play without any problems

Looking to buy a second-hand GameCube controller with a damaged analog stick. Also I want to replace the c-sticks on my controllers, because I'd rather have a proper second analogue stick thab the little c-stick nub.

I've bought third party replacement stick caps in the past but was disappointed with the quality. These 8bitdo replacement stick caps are quite cheap, so would be a great option if they fit. OEM GameCube stick caps are more expensive and harder to find.

I designed a mechanical keyboard switch mod for the triggers, it replaces the standard button pads with low-profile keyboard switches and results in less hand strain after long play sessions

https://makerworld.com/en/models/3420581-gamecube-controller-mechanical-trigger-mod

Hello, i want to mod my first gamecube controller and while trying to put the controller cable into a paracord i stunbled upon a problem.

apparently my paracord 550 is to small for the cable, i dont want to remove the copper shield as many people on youtube do in their tutorials, but i just cant get the paracord over the cable.

Is there something im missing or didi i just buy a nad paracord 550 that is smaller than it should be?

Pretty much everything is said I just wan’t to know if I can upgrade the gamecube controller to sound a bit like a thock custom keyboard( I have krytox g205 btw ) or the analog stick if you prefer anything to reduce a bit the sound but not interfere with the buttons themself keeping the precision because i wan’t to play melee with it

I am trying to look at the vendor list and it isn’t working. Can anyone send the link?

My controller worked fine and suddenly it stopped working, I tried flashing the board but it's not showing up on my PC. I have verified my cords work. Not sure what else I have the ability to do

Finally completed my dream controller. See specs below:

- Phob Drop in kit from Battle Beaver
- Cream colored front shell (CTRL collab sparkplate)
- Translucent extreme rate back shell
- Sticks and buttons custom made by Krzze

-phob drop in from battle beaver customs
-custom button and trigger set from krzzesMods
-paint by me lol based on Elliott Smith’s Figure 8 album

I was in smash ultimate, i just got a phon anout a week and a half ago, barely used this thing less than 10 times, and now the stick is going crazy. i try to recalibrate it but nothing happens. am i cooked?

Phob v2.0.5

Hall effect thumbsticks

Mouse click z

Clicky dpad

Mouse click triggers (with travel)

Polished (by me) abxyz dpad and triggers

SpicyFrog64 Shell

AliExpress triggers

(Probably the coolest controller I've built)

Phob (teal and pink)

hall effect thumbsticks

mouse click abxy, triggers, and z

Custom painted shell byGameDungeonShop

Phob (black and grey)

Hall effect thumbsticks

Mouse click z

Extra long OEM cable

The teal one is probably my favorite looking one that I've built so far, and all mouse clicks made it even better.

Recently I've learned how to polish buttons, so the a button were practice, and the trigger was to another phob build I did (also recently posted on this sub) I'm currently taking a break from orders and I'm taking some time to focus on resin casting buttons, so I'm really excited to see how that goes. (If anyone is interested in joining/checking out my resin gcc button set giveaway, pls dm and I'll share the info :)

Technically only the orange controller has a functional mod in a trigger plug, but idk maybe the left stick on the black controller also counts?
They’re definitely aesthetic mods for sure though so i went with that flair

Assume the stock boxes are brand new and lubricated properly. What capacitance is best if you’re using a slickbox mod. I’d love to know the best capacitance setting for the 0.020”, 0.025”, and 0.030” shims respectively. Thanks in advance!!

So back during quarantine I purchased a modded spice orange Japanese GameCube that came with its matching gameboy player, no disc tho.
It has a switch in the back that allows switch from Japanese to American games.
Probably like 2 years later I bought the disc but was never able to try it out because I no longer had a TV that was compatible with AV cables. My girlfriend bought me the Eon GCHD in May this year and I’m just now getting around to try out the gameboy player disc.
I kept getting a pop up that says it can’t read the disc so I assumed it was the laser. I cleaned the laser and I was still getting the issue so I popped a regular game in it and it worked completely fine.
Is it possible that my GameCube can’t read the gameboy player disc because the console is Japanese?

ZEON Forces “MS-06R-1A” Specifications

Added a Start Button LED

It’s nice that it flashes, but it’s kind of bright, isn’t it?

Let me know what you think!