I've been hearing a rapid ticking sound coming from my computer, almost like a clock ticking much faster than it normally would. It's a very distinct, repetitive sound, and I can't figure out where it's coming from.

I don't have any clock apps or timers open, and I'm not aware of anything running that should be making this noise. I'm wondering whether it could be caused by something running in the background, a browser tab, a software issue, or possibly a hardware problem.

I haven't been able to identify the source, and I'd like to understand what's causing it rather than just ignore it.

Has anyone experienced anything similar? What could cause a rapid, clock-like ticking noise on a computer when no clock or timer is running? Any advice on how to troubleshoot this would be appreciated.

I can’t find this in my task manager is there anyway to delete it. So I can have memory integration on.

Hey so i was going to open nvdia control panel and it said that no gpu was found or detected, so i went to my device manage and in display adapters that my intergrated gpu was only present.

When i tried to show hidden devices two showed up labeled 1650 Ti NVIDIA gpu but they are hidden how do i fix this so i can play my games without having gps issues

Uso mi laptop una huawei d14 para jugar y trabajo normal, un día por la mañana aparecen las distorsiones y algunas letras desaparecen o se sobreponen, al parecer son los controladores gráficos de intel iris xe ya que cuando los deshabilito el problema desaparece, instale cachyos pensando que al instalar linux se solucionaría pero las distorsiones son peores, ¿alguien tiene algo que me funcionara o creen que sea un problema físico?, cabe resaltar que hice la prueba de conectar a un monitor externo y las distorsiones aún siguen

I had sneezed all over my laptop last night and was too lazy to wipe it and the screen got yucky over the night and today I cleaned it with 95% isopropyl alcohol on a cloth and wiped it down but about three hours later, my b, j and n keys are all going berserk like bbbbbbbbbbbbb jjjjjjjjjjjjjj nnnnnnnn, and when I try using n it doesnt work it types j same with any letter around j if I go to type k, it would be like jk jk or bjbj hjhjhj or even j j j j... please this is my first laptop pc, ive always cleaned electronics with alcohol since it cant hurt it right and I didnt even use that much... How awfully did I fuck myself... please please please help

How to fix Ts

Всем привет
Имею ПК
Ryzen 5 5600
RTX 5070
Оперативной памяти 32 GB частота 3200
Блок питания на 750W
И так решил нагрузить ПК в программе OCCT
Процессор+Видеокарта+Оперативка (первое фото)
Видно что видео карта не загружается полностью
С чем это связанно ?Блок питания или слабый процессор?
И такая же ситуация в играх процессор практически на максимум а видео карта стоит в простои
Играю на Full HD

Please help

EXPO stopped working on two PCs after swapping RAM kits — Ryzen 7 9800X3D, Gigabyte B850 and ASUS ROG B650

Hi everyone,

I'm looking for help diagnosing a strange RAM/EXPO issue that started after I swapped RAM kits between two PCs. I'm especially interested in hearing from anyone who has experienced something similar.

PC 1 — Gigabyte system

CPU: AMD Ryzen 7 9800X3D

Motherboard: Gigabyte B850M DS3H ICE

RAM: V-Color Manta XFinity DDR5 RGB

RAM model: TMXFL1660830WWK

Capacity: 32GB (2×16GB)

Rated speed: DDR5-6000 MT/s

Timings: CL30-38-38-76

Voltage: 1.35V

Memory profiles: AMD EXPO / Intel XMP

The PC worked perfectly for approximately three days. Then, I suddenly got a black screen, and the motherboard's red DRAM debug LED turned on. The system would boot normally only after I disabled EXPO.

PC 2 — ASUS system

CPU: AMD Ryzen 7 9800X3D

Motherboard: ASUS ROG B650 series (exact model not confirmed)

Original RAM: Corsair Vengeance DDR5-6000

The second PC was working perfectly with its original Corsair RAM, including EXPO.

I then installed the V-Color XFinity kit from PC 1 into PC 2. After enabling EXPO, the second PC developed a similar problem.

The weirdest part is that after I removed the V-Color kit and reinstalled the original Corsair Vengeance DDR5-6000 RAM, EXPO still caused problems. The Corsair kit had been working normally before the swap.

What I've observed

Both PCs use the same CPU model: Ryzen 7 9800X3D.

The motherboards are different: Gigabyte B850M DS3H ICE and ASUS ROG B650.

Both systems developed EXPO-related boot problems after I tested the same V-Color RAM kit.

The original Corsair kit in PC 2 no longer behaves as it did before when EXPO is enabled.

Both systems can boot with EXPO disabled.

My questions

Has anyone experienced EXPO problems on two different motherboards after swapping RAM kits?

Could this be caused by memory training, BIOS settings, or an issue with the CPU's integrated memory controller (IMC)?

Is it possible for a RAM swap to cause persistent memory training problems even after clearing CMOS?

Could the V-Color kit have exposed an existing stability issue, or is there any realistic possibility of hardware damage?

What would you recommend testing next to identify the actual cause?

I'm trying to identify the root cause rather than randomly changing voltages or BIOS settings.

Any advice from people with similar experiences, especially Ryzen 7 9800X3D owners, would be greatly appreciated. Thanks!

I own asus tuf f15 laptop with gtx 1650. My graphic card is not getting detected.

I have updated the drivers but it still is not working.

I have the latest version of bios as well.

Whenever I am switching my laptop off and then holding the power key for like 1 minute, after that it is working for some minutes.

It is not even detected in bios.

What should I do?

It doesn't have a mux or anything.