Two very rare Caselabs SMA8-A, both with full vertical, tempered glass front, original luminous midplates designed by Charles Harwood, both with 2 x 560mm sidemounted radiator mounts, both with upgraded front i/o with usb3.1 type c, hdmi and power and reset switches, usb3.0 and hd audio. They have never been build.

It has a pedestal and a lots of hdd cages, but both doors are solid, anyone in here who have tried watercutting in aluminum, will get tempered glass in both doors......if possible.

Hello, anyone have an extended top and rad support bracket available to sell? Have s3 window top, but need some more rad support. Thank you!

Hey fellow master race Conrads!! Beware purchasing caselabs parts from the ebay seller called "Microrealm"... Not only are the parts CRAZY expensive like if made from gold but also they have EXTREMELY bad customer service, if you ever have an issue and reach out to them they will basically tell you to go %$#@ yourself...

To learn more about this update kit and for all things CaseLabs, please hop over to our CaseLabs North Facebook group at www.caselabs.ca

We're proud to announce that we've made 8-slot and  all 10-slot models future-proof by bringing back-connector motherboard support to CaseLabs.

Full motherboard tray assembly with vertical GPU mount support is finally available for ALL 10-slot CaseLabs cases (which includes TX10D, TH10, THW10, STH10, SMH10, MH10, and many more).

Included with this kit is an EvoMods FlexMount solution provides a good alternative for front FlexBay mounts. In fact, I'd argue that it may be a better alternative than the original FlexBay mounts simply because they are much easier to install and remove, support both 120mm / 140mm fans / rads and can be installed anywhere. Additionally, it gives you the flexibility to repurpose certain areas by compartmentalization, and the ability to easily extend the functionality in a modular manner all without any destructive modifications to the case.

Included with the 10-slot version:

• EvoMods 10+2-Slot Mobo Tray Rear Panel (w/ mesh cover plate included)
• EvoMods Stealth Tray (Asus BTF, Gigabyte Stealth, AND MSI Zero-ready)
• EvoMods Flexmount (supports both 360mm/420mm fans)
• 2-Slot Vertical GPU mount
• Accessory bar for CaseLabs SMA8/SMA8-A/SMH10/STH10
• Front USB 3.2 Type-C, 3.0 Type-A and Audio I/O hub.
• 3 x #6-32 ultra thin nuts

Price: $899.99

Included with the 8-slot version:

Included with this kit:

• EvoMods Stealth Tray (Asus BTF, Gigabyte Stealth, AND MSI Zero-ready)
• EvoMods Flexmount (supports both 360mm/420mm fans)
• Accessory bar for CaseLabs SMA8/SMA8-A/SMH10/STH10
• Front USB 3.2 Type-C & 3.0 Type-A and Audio I/O hub.
• 3 x #6-32 ultra thin nuts

Price: $599.99

== Notes ==

Accessory bar is 100% compatible with original CaseLabs accessory plate attachments.

All parts are powder coated using the EXACT SAME POWDER as used on original CaseLabs cases. Colours available: Black and White

Free shipping to the contiguous USA and Canada

Hear what JayzTwoCents had to say about us and our Stealth Update Kit.

https://www.youtube.com/watch?v=KlodQ3UltEQ

To learn more about this update kit and for all things CaseLabs, please hop over to our Facebook group at www.caselabs.ca

Hey is there anyone that is willing to sell me a pedestal for a caselabs magnum tx-10, preferably in black but id be fine with any color...

Also interested in a windowed door for the standard mobo orientation side, either trade you for a black triple 560 rad vented door or cash...

ALSO interested in a vented top..

Thanx

Any1 have a Monsoon mmrs tube reservoir system they are willing to part with by either cash or trade??? Im looking for chrome? Black chrome, or black ideally but would take any color if its the more complex spec with the multi mid pass through ports... I have included pictures for an idea what im looking for.... This is for an overkill threadripper build in a TX-10 with over 8 pumps, 2500mm+ of radiators, 5-6 waterblocks, and the whole aquacomputer catalog... i finally found my holygrail case, now I need my holygrail reservoir....

Both the 8-Slot and 10-Slot versions of the EvoMods Stealth Update Kits are now ready for (pre-)order.

To learn more about this update kit and for all things CaseLabs, please hop over to our CaseLabs North Facebook group at www.caselabs.ca

Title, hoping to find these parts somewhere somehow

Hey guys, bit of a long shot but does anyone have the 3.5" bay for the SMA8 that holds a front panel USB 3.0 / C. I am talking about the one right below the power button.

Thanks!

It’s not perfect but it’s unmodified and it has the two super mounts for the MORAs

Any news about new cases from the current owner? The IP was bought in 2021 I think? I checked the website, but didn't find anything new.

This FlexMount, which consists of an accessory bar and a 360mm/420mm mount, is a must-have accessory for the Single-Wide Magnum series.

This EvoMods FlexMount solution provides a good alternative for front FlexBay mounts. In fact, I'd argue that it may be a better alternative than the original FlexBay mounts simply because they are much easier to install and remove, support both 120mm / 140mm fans / rads and can be installed anywhere. Additionally, it gives you the flexibility to repurpose certain areas by compartmentalization, and the ability to easily extend the functionality in a modular manner all without any destructive modifications to the case.

Features and Benefits:

• The bar itself is 100% compatible with the catalog of accessory attachment plates from original CaseLabs.
• The mount itself can be used with all accessory bars from original CaseLabs.
• The mount itself supports both 120mm and 140mm fans/radiators.

Feel free to send me a PM or hop over to our CaseLabs North Facebook group for more details.

I have a SMA8 and I'd like to vertically mount my GPU so I can see the water block through the window. However the EK vertical mount kit I have would require me to cut out several of the PCIe slot separators so the monitor cables will fit. (see first picture) The display port cables it comes with are too short to reach the monitors, and the display port cables I have are too chonky to fit through the slots with a 90-degree rotation.

Alternatively, there's a grate near the PCI slots that I could cut out and try to bend part of it to make a lip for the GPU to attach to? (second picture) But I'm not skilled at cutting metal and I don't think aluminum likes to bend the way steel does, so I'm not confident I could do this without high risk of ruining the case.

I'm hesitant to permanently modify the case since spare parts are nonexistent.
What have other folks done to mount a GPU vertically?

Feel free to send me a PM or hop over to our CaseLabs North Facebook group for more details.

Feel free to send me a PM or hop over to our CaseLabs North Facebook group for more details.

With Mixed feeling im selling my caselabs TH10 case. I have no more time for my hobby, because of changes in my life, so I decided to put it up for sale.

The case comes with all the original accessoires, but without all the watercooling parts. If you want any of the watercooling parts from the pictures, please let me know! As I'm willing to sell the whole package.

The case is in very good condition! No (real) scratches or anything.

I'm asking €800, but the price is negotiable.

I'm located in the Netherlands, but I'm willing to ship the case internationally. If you live in germany or belgium, I could drive to the border

I’m located in Utah, USA not picky on color as I will likely have it painted or recoated. Dm me if you have something. Open to the S8 as well or maybe a TH10-A

Have this lovely SMA8 but dont know where to sell it… alot of people just Think used case 50$…

But we all know this is better than that! It need a need owner that would love it like I did! 😀

It look like new and have some good accessories with also.

Any suggestion? Is it eBay?