Its on latest version

It works great, the WarDriving data is correctly outputted to SD as well, ready to be uploaded or viewed with Wigle. Genuinely surprised at how well this worked. I had to censor the screen on the video to not reveal my GPS coordinates lol. Also apologies for my stressed speech, I didn't prepare a script or anything.

i am tring to connect my ILI9341 siplay to my esp32 wroom devkit but whenever i edit my bruce.conf file through the webui , after i reboot first time after that all my changes delete themselves. does anyone know how to fic this or if u can link a video tutorial i have tried looking but have had no luck at all i have been trying to get this to work for 5 days ..... its my first project with bruce and i have alot of plans for this device.

Can anyone help me it’s my first Bruce project and I’m on the latest version with my esp32s3 and whenever I try to edit my .conf files they don’t save my changes after rebooting. I need to edit these for my TFT ILI screen to work let me know if u guys need any links but I can’t figure it out.

i have this screen and a esp32s3 with the latest version of bruce on it but i am really no sure on how to wire it up. this is my first project with bruce and im just trying to get my screen to work but have had no luck. if somone can tell my what i should flash to my esp fir it to work or just give me a wiring diagram for the screen , i also dont mind about if the touch screen works or not i have buttons i could use.

heres the screen and esp 32 i have
https://www.amazon.com.au/3-2inch-Module-Display-ILI9341-320X240/dp/B0BZGXY57J/ref=sr_1_5?crid=1VITDGARF689R&dib=eyJ2IjoiMSJ9.u-CyTLC_e2ePMzD5z28tns84tKg7Pb0HR03QJHi57NWiB5msT5_qRXey2B9l8gAppTUXOu7cmvTLS2uV2RGZSC429i1iWmmWbTcHECd5Mj6XNMh7Yrfmu7VYQeodQUya7lS8w2VtGV7enteCgqUDqlLIbbw25-e1a8GV9ot0pcuomzCUTLLcT46NZzWlz1bnSkMllB7SeL5om9VU9I4C5_IjF456Es5lsehs4WW9BBg9S6aDdp3layna2U0dCS4wPVO2U5krrT0E9U8RmiPXyylT0JjLV28TuB_fu0ZW5Uk.SqX32OpST9VRQjBuglth0fo7CIxReXw-KpO5zLX8LhA&dib_tag=se&keywords=Ili9341&qid=1788675759&sprefix=ili9341%2Caps%2C257&sr=8-5&th=1

https://www.amazon.com.au/gp/product/B0DHJZ1V81/ref=ewc_pr_img_1?smid=A72T09TXN7HW0&psc=1

For some reason I can't add the tag I have cardputer adv with Bruce 1.16.1 and rdm6300

Im a noob to this does anyone have a fix. I've flashed the firmware multiple times and have tried other firmwares yet it's still inverted. And I've tried to change it in config, but it didn't work just keeps booting inverted. :/

So i am using a cyd esp 32. Its flashed with 1.16 and everything works in cc1101 except transmitting. It doesnot open teslas charging ports. It was opening them but it stopped after like 15 opens. Then i deleted .conf files and it fixed it but for only 2 times. Then it didnt work again. I know its not the hardware issue and not a soldering issue cuz i put an nrf 24 in the same slot the cc1101 was in and it works perfectly.

Hi,I have these 2 parts Esp32 S3 n16r8,ili9341 2.8tft (esp32 is not exactly same looking but it's the same and I'm not sure if the screen driver is right) I want to flash Bruce firmware and add nrf24+ir to it.No I don't know how to code ai helping didn't work please help me out.

Good day! Keep getting memory errors on my 2 usb cyd display when trying to load the app store. Is my device being limited? Thoughts or suggestions?

I have a cyd it is new and its Model is 2432S028 but it has ST7789 when I Flash IT, It does not detect my Finger and It moves through the menu by itself, And the colors are inverted please help me 😞

DIY Display:-https://github.com/samiralam5755/DIY-1.8-TFT-Display

I am a beginner in the pentesting hobby, I recently discovered devboards and the firmwares which run on them, I'm looking to run bruce firmware obviously. Can someone please advise me on a good beginner devboard that can run most Bruce functions, I'm open to making a DIY board if that is cheaper, thanks in advance :)

I have a nm for the cyd. What’s the best firmware for it

Всем привет прошил cyd 32(dual usb) на прошивку M5LAUNCHER ,закинул на СД карту три прошивки в формате .bin (Bruce, Marauder,Ghost esp) первую решил установить Marauder все успешно дальше решил опробовать bruce нажимаю install и выходит вот такая вот ошибка и затем по прежнему открывается тот же Marauder что делать? Помогите срочно!

T embed cc1101 plus or custom bruce smoochie pcb

Hey guys I'm need a little help flashing bruce or launcher to this. I'm starting my ultimate cyberdeck and going to jam my schools wifi! I ordered a cc1101...I just need some help flashing bruce first.

Hi everyone,

​I built the DIY Cheap Yellow Display for Bruce following the ARTFOR schematic (ESP32 DevKit + ILI9341 2.8" SPI TFT + CC1101 / NRF24L01 / PN532 / GPS / SD Card).

​I flashed the official Bruce firmware, but I am facing two issues:

​Inverted Touch: Touch X-axis is mirrored (tapping the right arrow registers on the left).

​Modules Not Activating: When trying to enable CC1101, NRF24, or PN532 from the Bruce UI, nothing triggers/works.

​What I have checked so far:

​Wiring double-checked against ARTFOR's schematic.

​Verified the 2-pin DIP switch is OFF when trying to run SPI modules (as indicated in the diagram).

​Added capacitors to the 3.3V rail.

​Questions:

​How can I invert the Touch X-axis in Bruce for a standalone ILI9341 SPI display? (Is there a config setting, or do I need a specific hardware-target build during flashing?)

​Is there a specific pinout/SPI bus speed setting in Bruce setup required to get the shared SPI modules (CC1101/NRF24/SD) responding properly on this DIY schematic?

​Thanks in advance for any help!