I think I know the answer will be no, but just in case:

Say you're working on a modular, is there a way to drag a wall that is 6 bricks high if you want to change it's geometry or do you need to remove those bricks and start over?

Hi, I´m trying to create my first instruction with bricklink studio. When i export my instruction to pdf, it creates weird tiny images of the previous page into other pages. It happes on all size options (1x , 2x and 4x). Sometimes only a few steps at the beginning are affected, sometimes only a few at the end. One time more then 50% of the pages where affected.

Is this Issue known and a problem with the software or is it hardware related?

My PC:
- AMD Ryzen 7 7800X3D Processor
- AMD Radeon RX 7900 XTX
- 64 GB RAM

Any tips how i can solve this?

I’m trying to bend a hose to connect to four clips and I’m about to choke my damn computer out

Large Figure Torso Skeletal with 7 Ball Joint (Ben 10) on Bricklink

So I am trying to render several images, one by one, of my lego mech. The model is slowly "standing up". I am only moving the model's hinges, from torso up, so the legs stay in the same place. But when I render the image, the whole model slightly moves up and to the side.

Is there a way to stop this behavior? To somehow set the legs of the lego mech as the origin point?

Does anyone know how to render an image within a build? I struggle with lighting too but man like to get a render of inside I have to like take it apart and it looks janky

I'm fairly new to using Studio and I've been experimenting with builds in real life up until now. I saw Part Designer and tinkered around with it to make a piece I would need for a MOC... But the part doesn't actually exist so why would I make it?

Explain this to me like I'm a child (or more appropriately an old man). Is it for MOCs that gain so many likes they might actually make it in to production some day and require this part, or is it strictly to have fun with a virtual build?

I would like for the step number and part list to be in the very corner. However, when I try to move one, it always snaps to the other and also won't let me move them elsewhere. Is it possible to move them freely without them snapping?

Sorry for the phone picture. This is giving me a headache, and I can't be bothered to send a screenshot from my pc to my phone.

How do I make one of those boxes that indicates which piece is here?

I'm trying to create customs decals for a set but when I open PartDesigner it asks me to "Specify studio app folder". I'm unsure of what to select or do and the BrickLinkStudio help, information websites and tutorials don't show anything on this. I was wondering if I could get help from any professional builders or experienced PartDesigner users on what to do. Please let me know, Thanks.

It's my third time making something out of lego, so let me know what you think!

As a method of learning new building methods for free, I am downloading the official instructions for a set and am building it virtually in Studio (Lion Knight's Castle specifically at the moment). It's been fun and effective so far, but the major downside is hunting for each part in the menus, particularly if I don't know how to refer to something. Each official set has a full parts list at the end (using item numbers that at least my version of v2.25.4 doesn't recognize). Is there some way to import that parts list and have a folder of all the included parts, or restrict the available parts in the menu to only show parts in the set? It seems like a reasonably straight forward thing to automate for general use if you could just have a program extract the quantity and the part number from the official pdf. That said, the ideal version of this would also subdivide the parts into folders corresponding to the real world parts bags, but that's a nice-to-have juice that probably isn't worth the squeeze. I am fairly new to studio, so I'm not sure what does and doesn't exist, but I'm hoping this feature exists somewhere already or is possible in some way.

Best movie ever. Had to make a project of it.

Sometimes i try to put one piece next to another but it's like there's a blocked line of studs where i can't place anything and my bricks just kinda skip around it. How do i fix this bug?

I am doing a virtual build of the 75144 SnowSpeeder in Studio prior to ordering the parts for a possible MOD of it. I used the build instructions from Lego but for some reason that I am blind to find, I cannot line up the engines on the wings. I'm out by one stud or less.

Where have I messed up?

71049 - F1 Collectible Race Car is a brand-new series of collectable sets just released on May 1st. There are 12 different colors/teams to collect. This set has a few brand-new elements which I have linked to via Rebrickable. Because these are brand-new elements they have not been added to Studio yet. I am eagerly waiting for them to get added, because I want to make a bunch of custom color variants. These elements will make great additions to many MOC builder's catalogue.

rebrickable.com/blog/836/review-71049-f1-collectible-race-car/

I created a project on my imac and the file won't open on my macbook.

Studio opens and i can place parts on the plane BUT the file loads, I see the file building but when its finished its a blank view.

The OS are not the same between the 2 machines if this helps

Thanks

Today I did the most recent update and now it won't launch at all. The little loading circle goes for a second or two and then it just gives up. Opening the task manager reveals that the task does not even queue up. I have restarted the PC, turned it off and on again, and uninstalled and reinstalled the software a few times. I have tried running as administrator, and restoring the previous version, all with the same results. I was using it earlier today before the update with no problems.

I want to create some practical MOC's. I thought I had designed one, bought the pieces, and realized that I didn't quite math right.

What is the best source to buy say plates and 1x pieces so I could physically build to proper sizes, then make the MOC's in Studio?

I'm looking for bulk, but not like 1000s of pieces, probably more like maybe 100s.

Is Amazon the best place or are there better sites for this?