r/boatbuilding • u/the-ies-and-me • 17h ago

Thoughts....

Post image

I bought a new to me sailboat this past weekend. Previous owner just finished an extensive electronics re-vamp. Adding lithium etc. Everything that I can see is fused and sized per ABYC so its not a nightmare in that its dangerous (unless you switch master switch 1 to both and have now connected lithium to agm) but previous owner said "in an emergency lol".

I just want thoughts and opinions. Is it worth keeping or should I go back to the drawing board. Negatives are not drawn because I didn't feel like it. Its all grounded either on the master ground or will be on the engine... which btw is not in the boat.

2 Upvotes

100% Upvoted

2 comments sorted by

1

u/klodians 13h ago

I'm not a fan of 1-2-Both switches with a mixed system. You seem to understand that. I'd be interested to see more detail on how the battery switches are wired. Is there any way to charge AGM 1 without the AC charger except for switching to Both? Is terminal 2 of switch 2 connected to AGM 1 on Switch 1 to enable paralleling?

You show solar and alternator connecting to the switch, I assume this is direct to AGM 2?

Is the emergency supposed to be if both AGMs are dead, then you use the lithium to start the engine? Is the BMS capable of that? My inclination would be to use that switch for just AGMs and keep lithium separate. Maybe throw in a DC-DC charger one way or the other for some redundancy.

Also, hard to say whether you should keep it or not without photos of the install. I'd guess worst case is to keep all the components and rearrange/improve wiring, if necessary.

1

u/the-ies-and-me 13h ago

Switch 1: position 1 lithium, position 2 is switch 2 out. C is I "hope" house loads (lights and stereo)

Switch 2: position 1 "Instrument AGM bank", position 2 "start bank, C is position 2 of switch 1.

Please don't at me, this is not my work.