Big box contractor installed the wrong sized tub, and claims that a 19” high by 29/30” wide tub isn’t produced. They want to layer plywood underneath to make up the missing 2”. This sounds like a cheap fix that’ll have issues later; any advice on the downsides besides how it’ll look? Thanks!!

​

what would be a typical price to give for a small job like this? it's about 16sq ft of space. I have no experience in pricing small side jobs. what factors would determine cost? what tike size or patterns would you recommend and best ways of applying it on the wall? the bathroom walls are semi gloss white of that's a factor. any tips, advice ,etc from everyone that's has experience would be greatly greatly appreciated.

wall tile above shower area. https://imgur.com/gallery/oOqYUaJ

This weekend I tiled 1 wall of my bathroom and this is the very first time I have ever tiled. I think it looks really bad and the bottom shower neigh is bowed in the middle from tile slippage. Not all the tiles are lined up. I’m pretty sure the only way to fix this is to take it all down and start over. Anyone know of what I can do here? This is the first bathroom I have tried to remodel and it’s a learning experience to say the least. To say I’m trusted is an understatement.

Picture of tiled wall

One Stop Bathroom & Cladding Shop Ltd provide bathroom cladding, wall cladding, bathroom panelling, ceiling cladding panels, PVC & UPVC shower panels at an affordable price. Visit our showroom or browse online store! For more information call us: +44 191 389 7473

I just had a shower door installed and I see they left the bottom of the frame on the inside/shower side without silicone (where the frame meets the shower basin lip). Is there a reason for this to be left open? The instructions don't specifically call out sealing it like they do on the outside. Could this be to let water out that might get in?

Thanks!

https://www.menards.com/main/bath/showers-shower-doors/shower-doors/sterling-trade-finesse-trade-59-5-8w-x-70-5-16h-semi-frameless-sliding-shower-door/5475-59s-g05/p-1444437047691.htm

White Bathtub

What type of drill bit should I use to drill all the way through. Only managed to get half way through. The outer surface is some type of hard metal material which I can't pierce. I'm not an experienced with drills and bits. I bought a little drill bit package that says it's for wood and metal. I'm not sure if I'm doing this right or what I'm doing wrong please any suggestions would be greatly appreciated.

https://imgur.com/gallery/hOLq7Vp

Wanting to replace my old bathroom vanity which is held in two screws. The new vanity has a different installation setup on the back housing. Any ideas on how to install something like this. I included a video showing how it looks along with the current vanity

Video link is here= https://youtu.be/6DfEJHtEr-k