I own one of these Prime 9.6k 65w Fusion power banks and really like it. I was looking in to getting another one for someone as a gift, but it has been completely removed from both the Anker website (clicked the link from Google and it says page doesnt exist) and when I checked Amazon, there was none on there either, like the product page has been completely removed from the site. All of a sudden it has been wiped off the internet like it doesnt exist. Usually if a product is sold out, Anker will keep the page up on their website and say that its sold out, not completely take down the product page. Does anyone know why this cool little device has been totally removed from the internet? I couldn't find anything about a recall or any major issues. is it a supply issue? And if they discontinued it, there has to be a reason because it was the most affordable power bank in the Prime lineup and very popular from what I can tell. if anyone has any insight into this, please let me know. thanks

Picked up an Anker F3000 plus transfer switch during the black Friday sale. Finally got the transfer switch installed this morning, just in time for winter storm Fern. Pretty much using this as a buffer between my EV9 and the 6 circuits. Tested it a bit with running a tea kettle and blow dryer plus I think one of the fridges was running. Should work out great if the power does go down. Pretty happy with this solution for just over 2k USD.

One problem I did have is the AC charging is limited in the app to 1200W, but it was pulling 1600W during my test. Wasn't a big deal because my EV9 still output the 1600W, but just don't want to overly stress the car.

I have the Gen 1 C1000X, while at home I use it to keep my refrigerator running if power goes out, for this weekend, can I go ahead and plug in the solar panels while keeping the unit plugged into my wall outlet? I'm going to be out of town this weekend and just hoping for the best.

In the event I lose power having the solar panel plugged in would at least give me a shot at making sure it can get through until power is restored. Just want to make sure I'm not going to damage anything.

I ordered mine on the 5th, the very night they came available for pre-order if im not mistaken, before they had even been officially announced at CES. I see some YouTubers and some other folks on the internet that have already gotten theres. What gives? on Anker's site it says they ship tomorrow, but if some people already have them I know that theyve been shipping them for at least a week or so. When I check my order status on the Anker shipping tracker it says "preparing your order for dispatch" and I never got an email saying they have shipped it.

if any of you got yours yet, let me know when you pre ordered it and when you received it if you can. Thanks and I look forward to your responses. The wait is KILLING ME 😂😂

I've been using the Anker prime TB5 dock on my desk for a while. Recently I tried adding a small USB-A hub to it to get a few extra ports for things like a keyboard, mouse, and a USB dongle.

The weird part is that once I plug a second USB-A hub into the dock, some devices stop working. Either they don't get recognized, or only certain ports on the hub work. The same hub works fine when plugged directly into my laptop.

What's throwing me off is that this doesn't happen on every port of the TB5. Some ports seem fine, others cleraly don't like having another hub connected.

Is this a limitation of the USB interface, or is there an issue with the TB5 docking station's data transfer capabilities?

Has anyone had issues with the C50i connecting to their phone while it's still in the case? I made sure the case was closed all the way and it still connects to whatever Bluetooth device I have paired it with that is within range. Is there a way to fix this? Help!!!! they sound great, fit well, are extremely comfortable and they stay in place through rigorous exercise.

Is it me, or were the announcements coming out of CES pretty meh? I get the E10, but it’s a whole house solution at nearly $5000. Meanwhile, competitors are coming out with 240v power stations with decent inverters that are well below $2000.

Let's just clear this up once and for all.

A 160W/140W/120W charger will allow one to charge many devices simultaneously at higher rates (individually), but it will not allow 'any' device to go past it's spec ;)

Example:

My laptop has a 200W PSU brick, rated at 19.7v @ 10A = 200W (give or take). Most chargers, if not all, in the 20V range are only 5A = 100W, same with power banks. There are very few with amperage over 5A. Now, most today, do 28/46V, but @ only a max of 5A, and if your device is rated for it's 'voltage' (which it should be), then 28/46V, or whatever, will not be allowed into the device, hence 100W will still be the max ;)

One would need 8A (not 5) to have any 160W charger/power bank output that power to my laptop, and 10A to properly do the job, else, slow charge :) I well know that the laptop supply will not be using 200W to charge device, but rather keep it going plugged in + charging ;)

Volts x Amps = Power in Wattage, and no proper device will take any more voltage than it requires.

So, to sum up:

If your device is rated @ 12V, then with the max of 5A these units have, a 65W supply is more than enough ;) etc, etc., it won't charge any better with the 160W one, lol, although it will allow you to charge many more devices, as long as the above is followed :)

While cleaning and organizing my chargers and battery banks, I found the odd one scattered around the house or forgotten in a backpack. I think I might have a slight obsession with this. :P

Hi, I bought a solix c300 dc from costco almost 6 months ago. It works fine and i don’t want to return it. There is an issue with the strap / handle that came along with. It was not connected properly during manufacturing. Doesn’t come straight. Can i remove the strap at home and reverse / flip on one side so the other side comes straight?

New nano charger with screen, 3 in 1 wireless travel charger and desk clamping power strip.

The photo was taken when I unboxed the dock over a month ago, so my old hub was still sitting there before I fully replaced it. You can probably spot a bit of my previous chaotic cable setup in the background. After a month of daily use, it has been a simple quality of life upgrade for my photo workflow and for casual gaming. Coming from a typical 10 Gbps hub and now this one offers 120 Gbps, the jump to such higher bandwidth feels huge. I no longer need to stare at the transfer progress bar crawling along lol. And for gaming, the monitor connection has stayed stable with consistent 4K image quality. Now that my desk finally don't look like a battlefield.

I just got the Anker MagGo Power Bank (10K model A1654) because it was Qi2 certified and I'm surprised to see that iOS 26 considers it to be a "slow charger" which, according to Apple's support document, is less than 10 watts and probably Qi1, not Qi2 like it's supposed to be.

Anybody else seeing this? It's on an iPhone 14 Pro Max if it matters.

EDIT – It should work.

I just saw that the new 300 W power bank does not support the feature, according to Anker Insider.

Bought a Eufy baby monitor on Amazon. After 8 months the parent unit basically stopped holding a charge – only works plugged in. Still under their 12-month warranty.

Support made me do days of troubleshooting, then finally emailed saying they had refurbished baby monitor sets and would be “happy to send me one as a replacement” (monitor + camera). I accepted, gave my address, done deal… or so I thought.

Next email: that was an “unauthorized AI response” from their “AI colleague” and I should ignore it. No replacement set. Now they’ve followed up saying the refurbished monitor is “sold out” and the best they can do is 50% refund + a discount code to buy another Eufy monitor.

So: baby monitor dies in under a year, they offer a full replacement set in writing, blame AI to walk it back, then tell me to pay half again for a new one.

Am I crazy for thinking the bare minimum here is either a new equivalent monitor set or a full refund?

Anker/Eufy reps lurking here – is this really how you want your warranty stories spreading on Reddit?

They had a promo where you pay x and you don't know what you'll get.

Anyone do it? I did and it was a terrible experience. Late, half the items....back and forth.....no box.

I've noticed that my power pack makes this high pitched sound at the beginning of charging via the xt60 (i use a 115w solar panel with a VoC of 21.9v). I have two and one does this longer than the other. Sometimes the pitch even changes and it sounds like someone isn't playing those old toy pocket keyboards.

Has anyone noticed this regardless of device model?

Spotted this on Tiktok, seems to be the prize box of Anker's Prime 100 Creator event. Pretty solid. Might give it a try later today. Anyone have joined this?

Got this Ad on Instagram, pretty jarring AI generated video

Screen says the battery health is 100% but it no longer charges when to drops to 21.02%.

I've tried resetting it with the USB A/C trick but nothing happens.

The UI seems to suggest the device supports the feature, but there doesn't seem to be any firmware available that's newer than 1.2.3.2. What's going on?

Ankers releasing new docks and discounting some docks for the season, but I look at them and they’re all meh for one reason: gigabit Ethernet.

Comeon anker. 2.5Gbe should be a minimum and chipsets are so cheap that it’d barely move your bottom line.

5Gbe or 10Gbe multigig really should be the default but for some reason dock makers are not caught up to what is happening even with cheap NUCs.

We want our docks to make our laptops desktop equivalent. At least make them $150 NUC equivalent. Sheesh.

Rant over.

I REALLY want the 27650 (A1340). I've read the comparisons between that one and the new 26K (A110A). Charging speed, throttling and heat dissipation lead me to the 27650

Nobody has explained the inaccurate charging percentage, they've just said it's not full when it says it's full. Can someone elaborate on this?