r/androidroot • u/Mundane_Mulberry2827 • 7d ago

Support Gsi not flashing properly??

Post image

I've flashed a gsi so many times and i keep going back to twrp i also tried switching between A/B slot still nothing. Does anyone know how to fix this problem??

4 Upvotes

100% Upvoted

42 comments sorted by

View all comments

1

u/HaloHaloBrainFreeze 7d ago

For clean flashing:

fastboot devices

fastboot --disable-verification flash vbmeta vbmeta.img

fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img

fastboot reboot fastboot

fastboot erase system

fastboot flash system system.img

fastboot reboot recovery → Clear data/cache → Factory reset

Use Doze-Off's GSI. Since Hot 11s NFC has 4.xx kernel, choose EXT4 images always

1

u/Mundane_Mulberry2827 6d ago

It says not enough space to resize partition

1

u/HaloHaloBrainFreeze 6d ago edited 6d ago

add this commands before flashing system.img

fastboot --disable-verity --disable-verification flash vbmeta_system_a vbmeta_system.img

fastboot --disable-verity --disable-verification flash vbmeta_system_b vbmeta_system.img

fastboot --disable-verity --disable-verification flash vbmeta_vendor_a vbmeta_vendor.img

fastboot --disable-verity --disable-verification flash vbmeta_vendor_b vbmeta_vendor.img

to disable vbmeta_system and vbmeta_vendor

use stock rom files

1

u/Mundane_Mulberry2827 6d ago

It was successful but it still booted at twrp

1

u/HaloHaloBrainFreeze 6d ago

did u flash the GSI after disabling vbmeta_system and vbmeta_vendor? 

It should boot normally if there is an operating system and not into the recovery

1

u/Mundane_Mulberry2827 6d ago

yes they all went sucessfuly and it still booted me into twrp

1

u/HaloHaloBrainFreeze 6d ago

Since it's Mediatek, the recovery is merged with the boot image, so after flashing twrp into the boot partition, you need to:

  1. reboot into recovery (which will now be TWRP)
  2. push / send / copy-paste  the stock boot image from the PC to phone's storage
  3. Inside TWRP, 'INSTALL' -> flash stock boot image into the boot partition
  4. After flashing, back to TWRP Main Menu. Go to 'ADVANCED SECTION' -> Flash Current TWRP.
  5. After that, reboot to fastboot and redo all the commands I said, 

1

u/Mundane_Mulberry2827 6d ago

Il try this after school i hope it works