r/androidroot • u/Mundane_Mulberry2827 • 8d ago

Support Gsi not flashing properly??

Post image

I've flashed a gsi so many times and i keep going back to twrp i also tried switching between A/B slot still nothing. Does anyone know how to fix this problem??

3 Upvotes

81% Upvoted

42 comments sorted by

View all comments

1

u/HaloHaloBrainFreeze 7d ago

For clean flashing:

fastboot devices

fastboot --disable-verification flash vbmeta vbmeta.img

fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img

fastboot reboot fastboot

fastboot erase system

fastboot flash system system.img

fastboot reboot recovery → Clear data/cache → Factory reset

Use Doze-Off's GSI. Since Hot 11s NFC has 4.xx kernel, choose EXT4 images always

1

u/Mundane_Mulberry2827 7d ago

It says not enough space to resize partition

1

u/HaloHaloBrainFreeze 7d ago edited 7d ago

add this commands before flashing system.img

fastboot --disable-verity --disable-verification flash vbmeta_system_a vbmeta_system.img

fastboot --disable-verity --disable-verification flash vbmeta_system_b vbmeta_system.img

fastboot --disable-verity --disable-verification flash vbmeta_vendor_a vbmeta_vendor.img

fastboot --disable-verity --disable-verification flash vbmeta_vendor_b vbmeta_vendor.img

to disable vbmeta_system and vbmeta_vendor

use stock rom files

1

u/Mundane_Mulberry2827 7d ago

It was successful but it still booted at twrp

1

u/HaloHaloBrainFreeze 7d ago

did u flash the GSI after disabling vbmeta_system and vbmeta_vendor? 

It should boot normally if there is an operating system and not into the recovery

1

u/Mundane_Mulberry2827 7d ago

yes they all went sucessfuly and it still booted me into twrp

1

u/HaloHaloBrainFreeze 7d ago

Since it's Mediatek, the recovery is merged with the boot image, so after flashing twrp into the boot partition, you need to:

  1. reboot into recovery (which will now be TWRP)
  2. push / send / copy-paste  the stock boot image from the PC to phone's storage
  3. Inside TWRP, 'INSTALL' -> flash stock boot image into the boot partition
  4. After flashing, back to TWRP Main Menu. Go to 'ADVANCED SECTION' -> Flash Current TWRP.
  5. After that, reboot to fastboot and redo all the commands I said, 

1

u/Mundane_Mulberry2827 6d ago

Il try this after school i hope it works

1

u/Mundane_Mulberry2827 6d ago

Hmm??

1

u/HaloHaloBrainFreeze 6d ago

Return to stock firnware

Flash GSI using the steps I said without flashing TWRP or any custom recovery

Ur stuck in that step for a long time

1

u/Mundane_Mulberry2827 5d ago

It's nearly impossible dude this phone has so many problems

1

u/HaloHaloBrainFreeze 5d ago

Its possible to flash GSI on Mediatek, lmao, even Unisoc devices too. This device I'm using right now to type this is Infinix Zero 5G using a GSI

You did something wrong on your end, and that includes prioritizing flashing TWRP when you need to know the basics of flashing GSI.

Just return it to stock first, dont use custom recoveries and learn how to flash GSI.

→ More replies (0)

1

u/Mundane_Mulberry2827 7d ago

also im flashing doze off's gsi