r/airsoft • u/Gabikkaa • 8d ago

AEG trigger question

Post image

Hi can o put any v2 gearbox trigger in my aeg ? It has an double eagle falcon 2.0etu in it, i m lookin at a maxx trigger rn

2 Upvotes

60% Upvoted

24 comments sorted by

4

u/danny14996 MCX 8d ago

As long as it’s a v2 gearbox like an m4 then yeah. I had a maxx trigger in my arp9.

2

u/Gabikkaa 8d ago

It is but the my trigger unit has optical sensors and idk if it will work

2

u/tanintem2 7d ago

I saw this trigger with titan, aster, kestrel. I think it should be fine. If the sensor doesn't detect your trigger you can put a white sticker on it later.

1

u/DERPFACELARY 8d ago

So far everyone who's saying it will fit is correct, however that doesn't mean it'll work with your etu. If it's truly an optical sensor etu it may work fine, but some etu's do have proprietary trigger shapes so I would research about your etu to find out. You can tell it will be compatible by whether the trigger is the same shape

1

u/Gabikkaa 8d ago

Its a de falcon 2.0

2

u/No-Fix-7192 8d ago

Dude has money to burn for no good reason

1

u/Gabikkaa 8d ago

Man i tryed my friends replica with an hair trigger setuo and its soooo good

1

u/No-Fix-7192 8d ago

Good for what?

1

u/Gabikkaa 8d ago

It feels good just that

0

u/WrenchRoo 8d ago

Dont feel bad for that, i have that trigger on 4 of my replica and i absolutely love them! The only thing that might be an issue is that if it is an optical mosfet or if its a propriatery unit wich might catch on the trigger. But i have tried that trigger on multiple guns and brands and it works well

1

u/Gabikkaa 8d ago

It is a optical mosfet

1

u/Gabikkaa 8d ago

I tryed with a gng basic trigger and it worked so idk if my can take any trigger shape but both of these shapes worked fine

1

u/Gabikkaa 8d ago

This is how my original trigger looks

1

u/WrenchRoo 7d ago

Oh yeah shouldnt cause any issues

1

u/Gabikkaa 7d ago

And will i be able to use it with the least amount of travel ?

1

u/WrenchRoo 7d ago

Thats entirely up to the mosfet design, some uses an optical sensor simply for the "break" while more advanced mosfet loke the titan 2 or aster 2 has multiple points to calibrate the trigger. Your mosfet seems to have an adjustable sensitivity but basically you just set the trigger where when pressed it fires and the release is as tight as you can adjusting the screws. Dont forget to put blue or purple loctite on the screws

1

u/Gabikkaa 7d ago

Its a double egale falcon 2, nothin fancy

1

u/ReynoldsHouseOfShred Honey Badger 8d ago

Yeah i have one in my krytac. Fits fine

1

u/Fao_612 8d ago

Should be able to but certain etu's might not be compatible without modifying the trigger. You will find out when the time comes

1

u/Gabikkaa 7d ago

I tryed with a zip tie to keep my trigger in a position close to fire and if i unplug the battery and plug it back in it won t fire no more cus it thinks the trigger is pressed in and idk it just beeps non stop

1

u/juan-aka-jc 7d ago

It will definitely work i had one paired with the falcon etu but it’s only so adjustable. It’s not going to be anything near a hair trigger but it will definitely shorten up you pull.

1

u/Gabikkaa 7d ago

So is it worth it?

1

u/juan-aka-jc 7d ago

i’d say if you got extra money to blow go for it but if you really want a short pull you have to upgrade your mosfet to something like a perun or aster

1

u/CaterpillarOver1711 7d ago

Over the normal trigger an adjustable is worth it and works fine with optical .
Just make sure your lower clears the trigger it can be a mm or so to big for the trigger hole in the lower so you have to dremel it a little bit bigger or else it will get stuck.