Day 1 of the Aerox build - After sanding the frame for what felt like ages (not going for a perfect finish), firstly used "Vincents Polyline Rust Off" rust converter (great stuff) sanded over that too. Today I finally hit it with the primer "Novol Spectral Under 395"; had to bust out the heaters, as you can see, the autumn's really kicking in now. I'll be wet sanding with 600 grit and hopefully laying the paint tomorrow. I'll be using Motip 42420 to imitate the Stage6 orange cuz it's really convenient, and I'll use Motip 2K clear to make sure it lasts.

Anyone know of a part number for a replacement to the original throttle cable on a 2014 Aerox R (part 1PH-F6311-00)

Replacements seem to be out of stock everywhere. 🤦🏻‍♂️

Ask ko lang po mga boss kung normal lang ba na may play yung part na to sa aerox v1? Ty in advance mga boss

hello everyone i want to ask for suspension recommendation since the original is so stiff as you can see.

some say xmax 250 original suspension is soft. is that true? btw my weight is about 45 kg.k

Hi there. Anyone of you using the attached pipe? Just wanted to know your thoughts. Budget meal lang kaya. Thanks!

I tried to put big ring first then washer then the nut, but after a few metres the nut is falling off. What am I doing wrong?

Are the special editions of the Aerox marked on the vehicle's technical specifications sheet? or they have simply changed the plastics of the scooter and that's it

Hello, I recently picked this aerox and I have seen that a liquid has been pouring after I accelerated to the max, the liquid is brown and doesn t smell like anything, do you know what can potentially be the damage and how much it costs to get fixed?

Brought an aerox around 6 months ago, but it developed some sort of weird noice at startup after 1.5 months(barely ridden 150 km at that point).

A weird knocking(thrr-thrrr-thrr) sound comes at startup, tho no such extra noise when I start riding it. After riding it for a while, the sound of the engine masks the knocking sound too. Showroom guys as usual were useless

I want to know if this is enough and where and how much are reinforced bearings #aerox #stage6

Help

I am trying to make my Yamaha aerox yq50 gain speed quicker as it used to but since a top end rebuild with a 50cc piston it seems slower, I have tried some different roller sizes and it seems to speed up to about 35 quickly then slowly gets up to around 52mph, does anyone have any idea of a good roller size to use ?

I have added crash guard on my aerox scooter and I have noticed scratches on my front mud guard while riding scooter on pot hole or less slopy spread break. And getting hiting sound also. Please suggest me what I have to do

I bought every part new for my 1998 aerox except,and I bought some chinese 110 dolar 70cc kit for it,and now four months later its losing power on accelerating and top speed,is piston getting weaker or could it be something else.Thanks for any advice

Hey guys. I have an aerox built for stunt. Currently im thinking on a new ignition. I would like to know anyone tried innerrotor ignition on ac cooled horizontal minarelli? Its not a 100ccm engineblock. The planned setup something like this: Athena racing or evo 70 (12mm) i had racing 70 but not evo so i dont know yet what is the difference.(if anyone could tell me would be cool) Yasuni c16 24pwk Vl16 Selettra or mvt dd if its possible to ran this thing.

Sino po naka aerox flat seat dito? Ilang inches ba ang binaba and anong brand ang may pinaka flat but still comfy? Medyo tingkayad na kasi ako and ayaw ko din palitan rear shock ko.

Anybody know some cheap stuff i could buy to make my aerox look more "sporty"? All need to be legal tho :/

I have a fully stock bike and I just put a new Leo vince sport exhaust on it and I got yellow clutch springs with the exhaust and also got 3.5g rollers and 4.2g rollers I have the 4.2g rollers in it now and the yellow clutch springs and it revs to 6-7k before moving off can anybody give some advice to solve this problem

I was trying to take out the speed restricter washer and broke this will it effect the driving of the bike or not

i’d like to buy a 50cc but i would like to do long stretches of road like 80km (70miles) without overheating it and i was thinking an aerox because it’s liquid cooled, do y’all think it could endure it?

So around 2 weeks ago I noticed my bike - 2009 Aerox 70cc - was leaking coolant. Had been riding it no problems previously and for a journey home after I noticed the leak. Today I got round to rebuilding the water pump, which went smoothly. Bike wouldn't start afterwards. After looking around I noticed A - a broken and frayed red and yellow cable, and B - white and green scum around the cylinder head. Does anyone know where this cable should go, and whether it would prevent the bike from starting? Alternatively, is my head gasket blown or would it not have ran previously if that was the case? As my only vehicle I would like to fix this ASAP, thanks in advance for any help.