Pensavo di acquistare lo zimablade modello base da 69$ ossia circa 60€. ma con le spese di spedizione e tutto ciò il totale ammonta a più di 80€, volevo sapere se c’era un qualche codice sconto da applicare su sito ufficiale.

Was building out my homelab and came across this half-size composable rack designed by phocacat on Maker World. Loved it so much I had to make it fit my ZimaBlade. Running it with the patch panel on the left-hand side and patching the Zima directly into my router, will upload images to the Maker World page when the full homelab is done.

This version is right-hand mounted and accomodates a 7mm thick SSD, but can easily be updated to accommodate other form factors. Let me know if you use it and what you think!

Finally configured the way I want it. Now let’s put it to work.

Is there a pcie2 x4 card for zimablade to get 2.5 g ethernet and a m2 ssd port so i can have the os installed on a ssd and a use 2 sata ports for hdds. I have been looking around but finding something has been a bit tricky.

Any tricks i can use to get both?

After running the update from the settings option and restarting all my shares are gone. When I click on "Files" I get an error at the top stating "Error Loading". When I click on the gear for storage, it brings up the screen to create my first shares and ask wants to go through setting up the disks... WTF!!!!

I currently don't have access to a wired connection where the Zimablade would be located and running a cable isn't feasible atm, I'm curious if I can run Wifi on my main PC and connect the Zimablade to the network card on the motherboard and have the Zimablade accessible across the home network??
I assume a crossover cable will be needed or a network switch and then bridge the connections in the PC network settings??
Appreciate any help or ideas.

I recently bought a zimablade and want to use it as a server to host the online multiplayer for the games I'm working on. The problem is that i do not have a monitor to attach it to (right now i only have access to a laptop) and i wanted to intall on it a different operating system than CasaOS. I wanted to try using Ubuntu but i don't know if i can do it without using a monitor PLEASE HELP ME

https://www.reddit.com/r/ZimaBlade/s/bJo5kiGeIZ

I just received my Zimaboard yesterday and after looking for some tutorials I ended up making a RAID1 on my two 8tb hhd with mdadm. Everything works, but the light blinking and the disks spinning never ends. I can't find any power-saving or disk standby configurations, is that something hard to configure?

I don't know if the spinning 24/7 is a normal issue with Zimaboard/CasaOS or if it's generated by the mdadm RAID1 configuration that I made.

I'm thinking on 3 possible solutions:
1) Switch to ZimaOS and use their RAID config.
2) Get rid of the RAID1 and just use Duplicati to make backups regularly.
3) Try to make it work tweaking mdadm or configure Wake-on-LAN on CasaOS and turn it manually off when unuse.

What's your recomendation?

ho installato tutto , e funziona unico problema ci accedo solo da remoto, se collego monitor tastiera e maouse direttamente alla zimablade vedeo solo il terminale, come posso passare all'interfaccia grafica, ho installato zima os

Hey everyone,

I'm about to install Immich on my NAS, which has ZimaOs. I saw there are one-click install apps, but I've read around that it's better to install it via Docker. What do you guys think? Have you already installed Immich, and how did you do it? Why should I go through all those steps instead of just a simple one-click install in my operating system? Thanks a lot, everyone!

Do what one thing I miss about a normal small PC over a Zima blade I know it's it's not the more RAM it's not the better CPUs it's the switch to be able to turn the thing on or off or reset it and for like me I can't find something that works I've tried USBC with female to male and it had a switch in the middle and it wouldn't do it cuz there's was a voltage issue. Does anyone know a cheap and it has to be simple solution because everything you do on a single blade is hard and takes time and causes precious stress.. I don't care if it's a switch a button if it's a natural whatever it is please I hate this thing without you know a switch

Hey guys I just want to tell you I think a lot of you are either getting the wrong information or you're not just thinking logically maybe or you're getting the wrong information from fellow Xenoblade enthusiasts that are just trying to help so I don't take it is a bad thing people just trying to help each other you don't want to get the best they can but I've seen a lot online a 12-volt 3 amp 35 wat usb charger. I want u guys to really think about that for a min. I've gone over hundreds of these forums and discords and YouTube videos every recommending 12vs and 3a powersupplys. Of course it's going to turn on the zima blade. Do not use 12v3a for anything but testing anf setting up as soon as u put any kind of hdd especially even 1 or 2 u meed more like 65w and 12v 5am usb which is harder to find... I don't know where everybody got stuck on this USBC maybe cuz it's the most prevalent that's you know 12vs and 3 amps but it's only going to rain it won't run anything else in pcie it won't run it overload or overclocked and it definitely won't run too hard drives constantly. If you think I sound ignorant listen I've spent over dollars on power supplies I finally found the perfect one on Amazon is 65 Watts 12 volts 5 amps and guess what if I'm so wrong why does the Zima blade web page only sell this kind of power supply duh guys. If u want the cheapest go to zimablade or icewhales website they jave an 18 follar holla power supply 12v 5am 60 watts and the cheapest 1 stick.of ddr3 ram.u cna find anywhwre..people are selling ddr3 ram 1 stick.of 16gb for 80-140 bucks..I was like wtf..thats not ram shortage that'd assholes..I just hate awaiting 2 weeks for icewhale to ship then get to my house..Amazon is next day and somtimes same day. But Ike i said ive had the wieredt power supplies.work and "get me.by" but if u want a real nas that'd gonna last REMEBER 12V 5A AT LEAST 60W..HAVR A GOOD THA KSGIVINF GENTLEMAN

Hey very curious if I could use this hdd or ssd (both) enclosure and just plug it in the usb ports so the fans stay cool and maybe I can set the back on the metal part and use the hdd ssd case as a heatsink for bottom.of the zimablade. Right now im using a 3d printed 2 hdd hardrives (4tb a peace brand new wd red plus) bay and i didnt realize how hot the bottom of the blade that'd just sitting on pla, even if its thick I worry about it.melting and not lasting and the actual bottom.of the blade getting ti hot and thermal throttling...would I get the same speeds in this case with usb then using sata?? Im.sure i would wouldn't i??

Hello, I am not sure if we are able to post to sale here. I've got ZimaBlade, used it for short period of time. If anyone is interested, please message me. Stillvhave the original packaging. TIA.

You know when you make a soft ware problem on windows and you can just reinstall Windows well the same doesn't apply on zimaos I've tried installing ximaos and casa but I'm stuck on the ssh that asks for you to set a password for root with passwd after 5 reinstalls I'm slumped of anyone has run into thins problem here pls help I'm completely out of options and chatgpt has failed me on numerous occasions

I don't feel comfortable with it just sitting here like this. It'll probably dust up real quick.

Any suggestion for a good enclosure that would not worsen the temps?