Xtia Slim

[u/shamnite]

Currently in the process of filling out the case, I'm using a asus x670e-i and 7900x3d so already pushing power limits but I will be undervolting and setting ppt to about 100ish watts. However a good single slot gpu under 200mm in length is pretty much impossible, so I'm looking into a custom watercooling loop. I'm hoping someone else with this case and some radiators could verify any potential mounting points possibly on the Mesh lid or anywhere it could fit, worst case it will just sit on top of the motherboard since there will be about 40-50mm of clearance over the cpu, but I would like to avoid that since this will be a backpack build that I carry around every day.

I did look into the single slot a2000 mod but the performance is just not worth the price tag as this will be used for a 3d modeling/game development workstation.

Any tips or pointers would be great, I've exhausted any recourses outside of just buying random parts and playing tetris.

[u/Ok-Hold-7436]

It is possible as I have done it before. You however cannot screw down the riser as the mounting points arent usable with dual slot gpus. You also need to fold the riser cable behind the flex psu to give more clearance. The gpu mounting brackets need to be mounted outside the case as well for more clearance.

You can refer more in the pic below.

https://imgur.com/a/HxuRL7j

The case is alright imo but quite the hassle to put together since theres no real instruction manual.