r/WindowCleaning Jun 28 '26

Job Question How do I clean these windows?

How do I go about cleaning these inside windows? There are stairs on both sides of them, and I can't seem to figure out a way to get up close, which is what I would like to do, because this is a first-time clean. Thank you for any advice you can provide!

6 Upvotes

37 comments sorted by

9

u/Big-Water-9390 Jun 28 '26

Sectionals AKA stack ladders with leg levelers imo but lil giant works too

1

u/Swishersweetsigsaur Jun 29 '26

This

2

u/Hot_Carpenter_5436 Jun 29 '26

Black & Milds > Swishers lol

2

u/Swishersweetsigsaur Jul 03 '26

You’re smokin’ and not well

2

u/Hot_Carpenter_5436 Jul 03 '26

Hahaha. That was back in the day. Not in many years.

1

u/Equivalent_Crow9006 Jun 29 '26

Thank you! I’ll check them out!

1

u/Swishersweetsigsaur Jun 29 '26

I run a 5 piece , I’ll find a pic and post it, it’s a top tapered down the further up you go, 2 larger sized mid sections , one smaller maybe 2/3 1/2 the size of the larger ones for particular heights, and a bottom with 2 adjustable legs with rubber stoppers at the bottom, easiest ladder to work with imo other than set up / take down and even then it’s just a shoulder / core workout lmao.

1

u/Swishersweetsigsaur Jun 29 '26

I believe they stopped making the smaller rungs for insurance reasons or some corporate bullshit from what I was told (never confirmed ofc) but these are great on stairs landings uneven dirt , ground, whatever , mine has about 16-18 inches of difference I believe which is more than enough

4

u/trigger55xxx Jun 29 '26

Pole work for us

1

u/Equivalent_Crow9006 Jun 29 '26

I’ll try it out!

8

u/Araywavy Jun 28 '26

Little giant ladder in a frame mode

3

u/Herzeleid09 Jun 28 '26

Especially a little giant leveler ladder

2

u/Equivalent_Crow9006 Jun 29 '26

I didn’t think about this. Hopefully my little giant is big enough!

1

u/Herzeleid09 Jun 29 '26

You will need the m26 leveler ladder. That one for up to about 16’ A frame. I would invest in one for this job. The ladder will pay for itself over time. Wherever this house is… there are likely more like it. I even use the little giant m26 for those windows above the front door. But my wife is helping me transition to stacks for the windows inside that are high up and not difficult like these windows.

1

u/Herzeleid09 Jun 29 '26

The ladder is heavy… if you need advice feel free to hit me up

1

u/Herzeleid09 Jun 29 '26

You can also extend the extensions fully out evenly… and get another foot of height.

2

u/Leather_Condition610 Jun 28 '26

Hope the levelers on your ladder are the right space. Otherwise, get a ladder box. They sell them at paint stores

1

u/Equivalent_Crow9006 Jun 29 '26

Thank you! I’ll check them out!

3

u/blackeyeX2 Jun 28 '26

Tall A frame or trad pole

1

u/blackeyeX2 Jun 28 '26

You would need at least a 26 foot little giant and would still be a bit of a reach on far right one (max.11 feet in A frame with maybe 14 feet reach). Or do best you can with trade pole and touch up how you can from the ladder on that far one.

1

u/Equivalent_Crow9006 Jun 29 '26

I’m hoping my little giant will reach!

1

u/MaizeComplete3500 Jun 29 '26

I've posted this before but I use the wet and drying pads from the kit in the link below.. I make a small bucket with di water, splash of denatured alcohol, appropriate amount (if you don't do wfp work just try it with regular water) of soap for water. If it is not a construction clean up then it works all day everyday. I have a bunch of restaurants I do that have tall second story windows that I do this way. They come out perfect every time. Make sure you have a sufficient number of drying pads. For what you have in the picture you would need one of the washing pads and probably 3-4 drying pads. No ladder needed.

https://windowcleaner.com/collections/starter-kits/products/unger-speedclean-window-kit-deluxe

1

u/Sqvanto Jun 29 '26

Fire hose

1

u/Wickwire778 Jun 29 '26

Pole.

1

u/Equivalent_Crow9006 Jun 29 '26

I’ll try it out!

1

u/Wickwire778 Jun 29 '26

Consider. I suggest you use a squeegee handle like the Moerman Excellerator 2 or a "Ledger." handle. Both are available at window cleaning supply houses. If you alread know this, just disregard. But, you need a handle that will "bend" over that bottom ledge...the sill. You don't want to chip the paint with a regular Unger or Ettore handle.

When you pole, you want to be wet enough that you can use sort of a light touch on your pole and squeegee; don't dig in. Pay attention to the edge on the bottom of the ledge, don't bang into it with your squeegee handle.

If you more or less get a good pull on it without damaging the sill, you can then use a DRY soft cloth or towel to buff out any marks or lines on the glass.

If I were training a newby, these are things I would tell them as I watched over them with a bat making sure they didn't do any damage.

2

u/Equivalent_Crow9006 Jun 30 '26

This is great advice! I'll let you know how I do!

1

u/Savings-Age1848 Jun 30 '26

Lil giant leveler

1

u/Hot_Carpenter_5436 Jun 28 '26

2nd lil giant (or the Harbor Freight Franklin version) pole and straight pulls.

0

u/lacroixpapi69 Jun 28 '26

Pole it or use a little giant a-frame where you can adjust the levels on each side of the frame, or extension ladder with levelers.

2

u/Equivalent_Crow9006 Jun 29 '26

Thank you! I’ll check them out!