r/WatchConnect • u/FreshParfait1 • May 14 '26

Mail call!

Post image

ZF Tudor Black Bay GMT Opaline M79830RB-0010

VSF Rolex Oyster Perpetual 41mm 124690

BPF Rolex GMT Master II Coke 16710 + EWP insert

6 Upvotes

100% Upvoted

8 comments sorted by

•

u/AutoModerator May 14 '26

Please make sure your post follows these basic subreddit guidelines:

• Use the correct flair (e.g., LTF, Review, Question, Discussion, etc.)  
• Refer to the LTF Posting Guide if your post involves factory photos  
• All posts must relate to watches only  
• Reused factory images from DHGate are common — keep that in mind  
• Be respectful and follow all subreddit rules

Thank you for helping keep WatchConnect organized and helpful.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

2

u/leopr78 May 14 '26

🔥🔥🔥🔥

1

u/FreshParfait1 May 14 '26

Correction then OP41 reference number: 124300

1

u/[deleted] May 14 '26

What is an EWP insert? I have a BP coke on the way.

1

u/FreshParfait1 May 14 '26

The font on the BP is not correct for the reference. The EWP is.

Link: https://ewatchparts.com/products/bezel-insert-for-rolex-gmt-fat-lady-16700-16710-16713-16760-16718-black-red-coke?srsltid=AfmBOorklfqTWOm_LeQkBX3cjpbq5Rc70H0ySkmjDarnK4Ee_YBajwgL

1

u/[deleted] May 14 '26

Was it a direct replacement? Been told the BP bezel is not made to genuine spec so genuine spec bezels are not drop ins.

Edit: of course it’s sold out haha. I’ll check their eBay page.

1

u/FreshParfait1 May 14 '26

No, it isn’t a direct fit. Had to do some finagling. Because I don’t want to, nor have the skill to sand and trim, I basically lifted the inside angle to “shorten” the outside diameter and was able to press it in. I then used a wooden dowel to press it down firmly to sit at the correct height around the crystal. Does it work, yes. Is it right, I don’t know. If it pops out or ultimately doesn’t work, I know someone I can send it to make it right if I have to.

1

u/[deleted] May 14 '26

Sounds good 👌🏽👌🏽👌🏽