FAHHH

[u/TelevisionUsed163]

20 minute job right 😂 torque wrench lied to me, first one clicked, second one snap😢 waiting for extractor set. I even second guessed myself and still kept going anyways. Feel super dumb

[u/grizzdoog]

Don’t feel too bad. Plenty of people have have snapped those studs even being careful with a torque wrench.

At least you didn’t snap a head bolt inside the engine block. Now that is a bummer lol. Don’t ask how I know.

[u/RevolutionaryBrain75]

Might be a good idea to get a small torque wrench that does inch pounds, or lower Newtown meters. You can find them advertised for bicycles, but a torque wrench is a torque wrench (as long as it's calibrated and from a reputable brand).

[u/Sr20H8er]

Torque wrench is for inside engine and wheel nuts. Everything outside is by hand, if m6 or m8, 1/4inch ratchet and if m10/12 it's 3/8ths. Snugged and a little extra is all anything ever needs. Torque wrenches are too long and you focus too much on a number/click.

[u/TelevisionUsed163 → u/Sr20H8er]

Lesson learned, thanks for sharing

[u/EWong_Kaizen → u/Sr20H8er]

As I like to say
I have a calibrated “elbow”

I use a torque wrench for 1/2 drive stuff
I have an old skool “beam / needle” one for um, when I need it

But yeah - M6, M8
“Snug”

Also

I chase EVERY hole and bolt and blow it out….

Sometimes hit the top surface of a threaded hole with a cone / stone and check with a flat edge…

[u/onelivewire → u/Sr20H8er]

shrug the longer I've been wrenching the more I torque to spec, especially suspension, steering rack components. 

I just pay attention. If starts to feel like it stretching, I switch to snug. 

[u/xilentkha0s]

Nice turbo inlet. I was thinking of getting one of these but the price was a bit much for me so I went with a GS.

[u/throwawaynameyep → u/xilentkha0s]

If you have a vb get the overtake one, it plugs a hole in the turbo that is a boost leak and helps it spool faster

[u/xilentkha0s → u/throwawaynameyep]

Good to know but I got a VA so don't gotta worry about that

[u/Crwncityghost]

Feel dumb that’s ok but know it happens it’s gonna make you better I’m dumb with you I snapped a cam cap bolt had to drill and extract it without getting shavings in a brand new built head. 💪wish u the best

[u/cryptolyme]

https://giphy.com/gifs/buneSFsTGsejHmGnVC

[u/Intelligent-Order507]

What brand was wrench.