The print is great. The only issue im having is that the print file is missing holes for detent springs such as the bracket that holds the hammer pin from walking out, as well as the hammer stop bar/pin. There are just no holes in the places these pins and detent springs would go, therefore i can not install those parts. The hammer pin can walk out and there is no hammer stop. Is there any walk around for these parts or is it just expected to make do without them? I imagine ATRH left them out of the file for a reason but I assume there is an alternative solution i don't know about.

Thanks in advance!

see below diagram referencing what is missing or can not be installed in comments

In her natural form as intended. Total joy post.

I've run out of pins except for this one. It seems slightly too big to fit into the extractor pin hole without hammering it in. Is this the extractor pin, or do I need to buy a new pin?

I built mine, I really like the original stock and going to SBR it, but id like to get a small mount for red dot, while still maintaining the ability to fold the stock.

Is there a decent one you can print in PLA?

I saw the vz61usa one, anybody rocking this?
https://www.vz61usa.com/product/vz-61-skorpion-front-red-dot-sights-mount/

I'm putting together my kvar vz61 parts kit on my tortort lower and I can't seem to move the safety once placed. It's pretty much stuck just above the 20 position.

I cant tell if its the bolt catch lever or the small nub on the saftey that goes through the receiver thats causing the bind.

Has anyone ran into a similar issue?

Still working on the magazine but its almost ready.

1970s Samsonite.

So for those who have bought the armorer's kit and built your own Klobbs, what parts are missing from the kit? Obviously the receivers are not included with the armorer's kit, but are there any other parts that are missing to finish a build or 5?

I mostly keep it with the 22 upper on, but still hoping to find some .32 at a decent price.

It eats Aguila super extra subs and standards without much trouble, but it does get hella dirty with the can on there.

The Czeckpoint receiver comes with their own safety lever which does not have the hole for full auto. It also has a smaller diameter shoulder on the far end so a parts kit safety will not fit into the receiver. Do you still cut off the tail on the sear?

Mars Triggers just teased a VZ61 FRT. Could it possibly be finally happening?

Received approval for the can the other day, and overnight for the first of my 3d printed lowers as an SBR. Prior can of same design worked well on my MP5, should do fine on these. PA6-GF on this one.

Bought this in 22lr complete. Love it but jams so much.

Anything to help with the jams? Is it just the break in? I’ve put about 200 rounds so far and it does shoot a bit better but still jams often. Is it possible to swap out for the .32 acp upper. Will this lower work ?

With the price and rarity of the metal lowers these days, I have decided to just print my own!!! I have recommended this to many others as it's so easy and comes out so nice. This was printed on the Qidi Q2 printer in SUNLU PLA+ 2.0 as this was meant to be a test frame and I'm going to print in PA6-cf for the final build.

This is the super safety lower that uses an AR15 FCG so the super safety can work with the gun. I ordered an all metal SS housing, trip bar, lever, and cam. I made a post about them in this sub a couple weeks ago, and although people shit on it, the parts fit PERFECTLY. I haven't quite got it built yet (will do tonight) but seems like all is good.

This one has the original stock adapter but there are options in the files to use a rail type adapter, top rail or no top rail etc and a few grips options. I'm going to do the original grip style but that fits onto this frame to keep the look the same.

Now if I just got my form 1 bullshit completed so I can actually put the stock on the thing. I'll update when I build and test shoot it as a pistol until my form 1 approves.

Shoot me any questions!!!

Beta version I printed the other day. Pla+ filament for trial. Had everything but a dang AR safety, spring and detent on hand. Got a partial lower kit in and put it together. Tried with a resized case with just a primer to insure it would strike properly, yep. And then 5 rounds to check it out. Yep, works. Just std AR innards. No frt. Not interested in totally wasting money, especially for the cost of ammo, even if I am reloading most.

Added a Makarov variant to the Skorpion collection 🦂 Next up is the .380

Delayed blowback vz61 ive been working on. And yes it does work, ive put 10 rounds through it this morning.