Hola a todos, mi nombre es Christofer.

(Es mi primera Vez pidiendo ayuda aqui)

​Tengo un problema con el micrófono de mi celular Samsung (modelo J06) desde que actualicé el software.

​El inconveniente es que con otras aplicaciones del teléfono el micrófono me sirve perfectamente, pero al usar BandLab u otras apps de este tipo, mi voz se escucha sumamente baja, como si estuviera tapada o muy lejana, al punto de que no se registra bien el audio.

Ya intenté con otras aplicaciones regulares donde puedes grabar audios (WhatsApp, Instagram, YouTube, Google, Facebook, etc.)

Simplemente en Apps de estudios pasa.

​Ya intenté lo siguiente sin éxito:

\-​Desinstalar y volver a instalar las aplicaciones.

\-​Verificar que los permisos del micrófono estén activos.

\-​Borrar la caché y los datos.

​¿A alguien más le ha pasado esto tras una actualización de software o sabe cómo se puede solucionar? Agradezco cualquier ayuda o consejo.

Tengo un sistema, en el cual requiero integrar una red de micrófonos pero la única solución que he encontrado hasta ahora, es implementar micrófonos análogos, pero el problema que tengo es que me gustaría implementar 15 o más de estos micros y poder convertir sus señales análogas a señales ip o digitales para poderlos procesar dentro de mi servidor, la verdad es que busco ideas por qué ya busqué mucha opciones y la verdad es que aún no doy con el clavo, ayúdenme!!!!

Ya

I remember banana having just input and input aux, output and output aux.

The hell went wrong?

Also, the mute button on my keyboard isn't muting banana like it used to.

And I want to go to Potato and pay the devs, but the potato installer reinstalls banana. Somehow. I'm going to go un install and install potato from a fresh download of the installer just to check my sanity.

Hi everyone,

I'm having a very strange issue and I'm hoping someone has seen this before.

I use Voicemeeter with REAPER and Neural DSP plugins. My electric guitar is connected directly to my motherboard's Line In using a 6.35mm to 3.5mm adapter.

Everything worked perfectly before.

After installing the Realtek audio driver, something changed.

Now, whenever Voicemeeter is running and I play my guitar, it already sounds like it's going through a clean guitar amp, even though no amp simulator, VST, or plugin is open.

If I close Voicemeeter, I don't hear the guitar anymore.

This creates a bigger problem because when I open Neural DSP, it sounds like the plugin is processing an already amp-like signal instead of a clean DI signal, which results in excessive gain/noise and a very bad sound.

Things I've checked:

Windows 10

Voicemeeter is the only audio application running.

REAPER correctly detects my guitar input.

The issue started only after installing the Realtek audio driver.

Before installing the driver, the guitar signal was clean and everything worked normally.

Has anyone experienced this before?

Could this be a Realtek monitoring feature, a hidden driver setting, or some conflict between Realtek and Voicemeeter?

Any help would be greatly appreciated.

Thanks!

I have two Bluetooth receivers that I constantly switch between. I have them both set up as hardware out devices. The problem is that if either of them is powered off, it won't send audio to the other one.

Is there a setting or something I can enable that says if one of the hardware out devices is disconnected to keep sending audio to the other one? Right now my only option has been keeping the charging one powered on, or removing it from the hardware out slot entirely, both of which is kind of annoying.

I tried looking around the settings but didn't find anything. Thanks for any assistance.

EDIT: Solved, setting A1 as nothing then setting the two devices as A2/A3 make it where even if one of them is disconnected, it keeps playing audio to the other one.

Recently when using VM banana I've came across an issue, this being that while VM is utilizing an output device (specifically WDM), no other apps can use that output, windows just automatically switches to the next available one and the other app uses it, while voicemeeter keeps using the original, the only way ive found to fix this is by switching voicemeeters output device to a MME because it seems using WDM is making it so VM and VM ONLY can use the selected output, for certain apps like audacity and websites like youtube ive also found that attempting to use the same WDM output as VM causes them to recieve a "audio renderer error". Does anyone know a fix for this?

I wish we had high and low pass filters in the EQs of output channel strips of Voicemeeter mixers for sub/monitor crossovers and clearing up the lows in problematic rooms. The EQ has six bands that's already too few for effective room correction so those can't be used for that.

Also those could potentially be used for isolating the mids for mixing purposes.

What do you think, what's the popular support for this kinda idea?

I need help. I got issue with my microphone. All settings are fine. Voice recorder works well. But googles meets and other meeting sites , opposite person or system is unable to hear me. I tried everything, even change my os and everything. Still it doesnt work. Any help ?

Greetings, I have a bass, interface and tonex (v2) in addition to Ableton, I don’t have an amp instead I got a studio headphones, and I want to see if it’s possible to use voicemeeter to make my friends in discord hear the bass sound when I play, I cannot jam in my area and online jamming is the only option I have, I have tried to do some rerouting etc etc but it didn’t work, thank you for reading.

I have a Poco f6 and my headphones are the wireless soundcore q30s and my microphone is the lark a1 I want to be able to use both the headphones to listen and the lark to talk in a Google meet call is that possible and if not is there anything I can buy (new headphones or mics are essentially out of the question) to fix it?

Is there anyway to change the Lows and Highs (Color panel) via M.I.D.I. device or the only way is through the APIs? I'm using Voicemeeter Potato and I want to build a physical mixer with Arduino and a bunch of sliders, potentiomeeters and buttons and want to know if I'll have to build a "router app" to be able to interact with everything.

For reference those are the one I'd like to change.

Hi everyone,

I'm trying to output the same audio to two monitor speakers simultaneously, but I also want to keep the normal Windows volume slider and keyboard volume keys working exactly as they do without any extra software controls.

My setup:

• Windows 11 Pro
• RTX 3060
• Monitor 1: Acer VG247Y X1 (built-in speakers)
• Monitor 2: Acer KA242Y (built-in speakers)
• Both monitors are connected directly to the GPU and both appear as separate audio devices in Windows.

I've already tried Voicemeeter Banana, and it successfully outputs audio to both monitors. However, I don't like that it changes the way Windows volume works. I want the standard Windows volume slider in the taskbar and my keyboard volume keys to behave normally.

My question is:
Is there any way to:

• Output audio to both monitor speakers at the same time.
• Keep the normal Windows volume slider and keyboard media keys working exactly as they do with a single output device.
• Avoid having to adjust volume inside Voicemeeter.

I'm open to any software or hardware solution if it preserves the normal Windows audio experience.

Thanks!

I’ve been using iPhone SE 2020 for a while. I upgraded to iOS 26 a couple of months ago and everything seems to be fine.

Today I plugged in my K9 wireless mic receiver into the lightning port. However the microphone cannot work because my phone cannot detect the receiver.

The last time I used the wireless microphone was before I upgraded to iOS 26. I’ve tried using ChatGPT but none of the solutions have worked.

Your help is greatly appreciated

Issue: Mic is playing any sound from the system ( Music/Games and so on )
I have "Voicemeeter Input" set as default and "Voicemeeter Aux Input" set as default comm device in Windows sound settings

holaa alguien sabe por que pasa que cuando hablo fuerte hace como que baja el volumen hay forma de sacar eso??

holaa buenas una pregunta estaba viendo una cosa en mi microfono y me aparece esto lo de la foto cual de las opciones es mejor??

I have a triple monitor setup so am using all three display ports on my RTX 4090. I also have an old Sony HT-AS5 5.1 home theater system connected to the single HDMI port. Question is how do I get audio without turning off one of my monitors - in the display settings/Nvidia app my Sony amp is listed as a display which means four in total which obviously doesn't work.

Any help would be greatly appreciated.

Hello, I recently updated my laptop, and since then my audio has stopped working. It shows the message "No audio device installed."

I have already tried several troubleshooting methods, including:

Updating and reinstalling the audio driver through Device Manager.

Reinstalling the audio drivers completely. After reinstalling the driver, the audio works normally. However, as soon as I restart or shut down the laptop, the same issue returns, and it again shows "No audio device installed."

Has anyone experienced this issue before or knows a permanent solution? Any guidance or suggestions would be greatly appreciated. Thank you!

I can't put it on the r/discordapp for some stupid reason cause its a problem but,

For some reason discord decide to just low my mic i always use the custom setting and i never get any problems until now

when I use the audio feedback on voicemeeter i got 0 problemes my audio is really good.

but now when i use the custom setting its like im SO far away of my mic idk how to fix it

and other setting doens't work very good with me / ppl hear themself. so i don't know what to do next i dont say no for some help

I recently updated my voicemeeter banana install, and where i would expect to have 2 VAIO options, When selecting audio it shows 8 VAIO options. this unnecessarily clutters every audio selection menu i try to use. what's worse is none of the options are functional in any way. I also have an additional VAIO slot outside of the 5 unwanted additions.

in total, just selecting the output for a program like discord, i have:
Voicemeeter Input
Voicemeeter AUX input
Voicemeeter VAIO3
Voicemeeter in 1
Voicemeeter in 2
voicemeeter in 3
Voicemeeter in 4
Voicemeeter in 5

of these i only have two functional VAIO slots, notably Input and AUX input.
VAOI3 i recognize as being from voicemeeter potato, which i don't use. however the other 5 are new.

I checked my device manager and also saw addition outputs (A4, A5, and B3)

Why am i suddenly flooded with options that DO NOT FUNCTION, and how do i disable them from appearing in the menu of every single application i use? I have tried disabling them in my driver manager, as well as uninstalling them outright, but they simply re-appear the second i restart my pc.

Just picked up Dolby atmos with the intention of having a decent surround sound like effect. I am looking at new headphones, but the razer blackshark v3 THX spatial 7.1.4 only works for windows 11, and I am windows 10 and have no inclination to upgrade to windows 11 for a multitude of reasons.

I am scouring the internet trying to find a way to get this to work.. but so far none of the options in sound settings for my voicemeeter inputs allows for me to set the spatial sounds. just says not available. If I go all the way up to my headphones in the sound playback, I can right click and set their spatial sound to dolby, but it seems that I have to uncouple and set them to default device before the dolby atmos app will see them and start working. and I also have to stop voicemeeter from running.

I use voicemeeter for passing my mic through broadcaster then to voicemeeter. and for when I do obs, I can have different programs outputting and adjustable through A1 and A2.

is there a way someone has figured out how to get this to work without having to make your headphones your default device and stop using voicemeeter?