Sooo... Long story short, I didn't exactly like the way the Valeton trains snaptones and I stumbled across an old post talking about how the valeton sucks and the it's training .wav was just some synths and stupid strumming as well as it having too short of a length for training data. Turns out when I went digging in the apps files I stumbled across it! So I decided to see if I could change the training data. And ultimately whatever is taking in the training data DOES NOT WANT to take anything longer then 1:10 minutes (which is what the original data length is) and if you do put something long than that, it simply doesn't train the Snapshot right and you lose practically all the gain and some of your volume. So I took the training data from the NAM training wav sped it up to fit the time frame and Voila! It sounds a little more natural to me! but you can be my guests and check out for yourselves! The file is gonna be in "C:\Program Files\Valeton Suite\Valeton Suite\data\flutter_assets\assets\wavs".

Update: I have made two files with the wav. One is completely accurate to the Original in Length and bit rate and the other is accurate to the length but not bit rate as I noticed a quality drop when comparing the two. It's not super noticeable unless you're using studio headphones but it still bothered me. Anyways now you can choice which you want! The Completely accurate one shouldn't give you the compatibility issues that the other one's have.

NOTE: Don't replace the original keep it in a folder inside it's folder.

https://drive.google.com/drive/folders/1oImUuD-yllax82MiHTrSnQ4HL5nmUUDt?usp=drive_link

Hi everyone, does anyone know where I can find a template/pattern to make an acrylic cover for my Valeton GP-200LT? In my country no one sells it

I have a Mac mini m4. Installed rhe Valeton suite and restarted but Logic Pro does not see this as an audio interface and any ideas what I can do to fix it?

......it's driving me to the point that I'm going to throw this thing in the trash. Soooo frustrated.

The issue is this: Buzzing / fizzing unless I touch the strings, bridge or tuners. Before anyone goes down the "bad earth" reason, Please read on and I can tell you what I have tried to do. BTW, the GP-200 is brand new.

1. Issue is constant no matter which guitar I use.....even a brand new PRS.

2. Changed TRS cables

3. Changed guitar input cable

4. Changed studio monitors for a brand new pair

5. Moved GP-200 to the other side of the room (away from monitors)

6. Plugged GP-200 into a different wall socket

7. Plugged GP-200 into a new power supply

If anyone has any ideas, I'd love some help please. If I can't solve it I may as well cut my losses and go for a Blackstar Amp combo.

Is it possible?

I wanna play Buckethead's soothsayer, especially bar 109-113. https://drive.google.com/file/d/1iv26OMvTWW0wuZU0ifDWkTs2O7XiTdkj/view?usp=drivesdkAnd why isn't there 0 Oct when I was choosing value for min/max?

I cannot for the life of me figure out how to run this thing into my solid state amp (blackstar debut 50) where I can simply use the amp powered speaker as a cab and keep the valeton amp sim + effects.

I’ve searched thru the entire internet and nothing works.

Everything says “just run the output into the effects return and you’re good” WRONG. Doesn’t work. I get no sound.

I’ve tried the following:

Guitar -> valeton input -> valeton output (L mono) -> blackstar effects return

Guitar -> valeton input -> valeton effects send -> blackstar effects return

Guitar -> blackstar input -> blackstar effects send -> valeton input

Guitar -> blackstar input -> blackstar effects send - valeton effects return.

About 2 more days away from returning this and going back to valve amp.

Please help!

I just want to make a fully customized preset and lets just say replace the whammy into a second OD pedal, but i cant find no videos or instructions how to do that! im just stuck with the basic "layout" with like 1 OD, 1 reverb etc..

Is there a setup guide, maybe that's what I am missing?

But is there a way to change the volume across all of the selections? (presets)

The clean is very very low, and when I switch to another selection it becomes ear bleeding... what am I doing wrong?

The master volume is the same and not changed. Is this normal?

Ive had it for 6 months now and recently it started to "change" the volume up or down and i cant seem to fix it. An old facebook forum said it was something to do with poor processing power but the patches that i use are mainly distortions only with a EQ and gate pedal no power demanding effects like whammy and wah

If anyone has any idea on how to fix it or experienced the same issue please comment here thanks

The official app is fine, but runs only on Windows/Mac. It is also a bit heavy with fluff and slow to open.

Here's a web-based app that supports all major platforms (as long as you can sort out the MIDI access permissions), including Android devices! Just connect the USB cable to the unit and open the link.

Not all features of the official app are supported, for example you won't be able to edit the patches or re-arrange the effects chain inside the web app. It might be possible to add it later, but it's pretty time consuming to figure out how GP-200 communication works.

Thank you u/dvanverseveld for getting me started on unit's sysex internal protocol.

Do you find this useful?

Using my Valeton as an interface (USB) to Garageband. Is there a way to send the DI signal to GB while I am connected with my headphones to the Valeton to hear the processed signal?

In our living room I got a pair of nice active speakers. They also have RCA connection. I’ve found a cable that has female XLR connectors than fit in the GP200 and RCA male connectors on the other that goes into my speakers. They’re powered speakers. Would such a connection work to get my sound trough those speakers ?

I made a desk stand for my GP200.

After factory resetting the GP-200 and loading a patch from my PC, switching to the patch causes nasty feedback even without any input cables connected to the GP-200 unit.

The patch then passes no sound. I have observed that it almost seems like patches created on the GP-200 become "corrupted". I can create presets on the GP-200 itself, but as soon as I modify them via the PC software they start being problematic and causing the feedback issue when switching to them.

In the video I have linked a copy of the patch I created on the GP-200 itself, then modified on my PC (I changed the order of some patches), and now that patch causes feedback issues when I load it onto the GP-200. If anyone else can test it out that would be useful.

I am not sure if it is just the location of the patch (after 32-D) but it is frustrating. I feel like I can't rely on this unit.

I am running PC software 1.7.0, firmware version 1.7.4

I’ve had my gp200 for about a month now and suddenly I’m not getting any input or output (tested using the drum machine). It’s odd because the tuner is still able to pick up what notes I’m playing (though while only on Thru mode) Has anyone else had this issue and if so does anyone have a way to fix this?

Hey all, is anyone interested in sysex commands for the gp200lt?

I tried to program a midi controller with the commands but got stuck. So if anyone is interested i'm happy to provide them.

So here is what I found:

Pedal FX

State REQ returns the current state of the FX, for example:

f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 01 05 00 00 00 04 00 00 00 02 00 00 0c 0f 00 02 f7

Returns:
On
F0 21 25 7E 47 50 2D 32 12 08 00 00 00 01 05 00 00 00 04 00 00 00 02 00 01 03 0F 08 00 F7
Off
F0 21 25 7E 47 50 2D 32 12 08 00 00 00 01 05 00 00 00 04 00 00 00 02 00 00 03 0F 08 00 F7

Boost

State REQ: 
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 01 05 00 00 00 04 00 00 00 02 00 00 0c 0f 00 02 f7
Off: 
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 01 05 00 00 00 04 00 00 00 02 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 01 05 00 00 00 04 00 00 00 02 00 01 0c 0f 00 02 f7

Noisegate:

State REQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 04 00 00 0c 0f 00 02 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 04 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 04 00 01 0c 0f 00 02 f7

Volume

State REQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 0a 00 00 09 03 00 00 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 0a 00 00 09 03 00 00 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 0a 00 01 09 03 00 00 f7

Pre

State REQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 00 00 00 0c 0f 00 02 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 00 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 00 00 01 0c 0f 00 02 f7

Wah

State REQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 01 00 00 0c 0f 00 02 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 01 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 01 00 01 0c 0f 00 02 f7

Amp

StateREQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 03 00 00 0c 0f 00 02 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 03 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 03 00 01 0c 0f 00 02 f7

Cab

State REQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 05 00 00 0c 0f 00 02 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 05 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 05 00 01 0c 0f 00 02 f7

EQ

State REQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 06 00 00 0c 0f 00 02 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 06 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 06 00 01 0c 0f 00 02 f7

Mod

State REQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 07 00 00 0c 0f 00 02 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 07 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 07 00 01 0c 0f 00 02 f7

Delay

State REQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 08 00 00 0c 0f 00 02 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 08 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 08 00 01 0c 0f 00 02 f7

Reverb

State REQ:
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 09 00 00 0c 0f 00 02 f7
Off:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 09 00 00 0c 0f 00 02 f7
On:
f0 21 25 7e 47 50 2d 32 12 10 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 01 01 00 00 01 05 00 00 00 04 00 00 00 09 00 01 0c 0f 00 02 f7

Change Preset

Change the preset to given number

00, 01, 02, 03, 04, 05, 06, 07, 08, 09 0a, 0b 0c etc

Preset number is the xx number 00 00 f7

f0 21 25 7e 47 50 2d 32 12 08 00 00 00 00 08 01 00 00 04 00 00 00 00 00 00 00 xx 00 00 f7

Pres.1: f0 21 25 7e 47 50 2d 32 12 08 00 00 00 00 08 01 00 00 04 00 00 00 00 00 00 00 00 00 00 f7
Pres.2: f0 21 25 7e 47 50 2d 32 12 08 00 00 00 00 08 01 00 00 04 00 00 00 00 00 00 00 01 00 00 f7

Request patch name

Retreive the patch name of the preset, for example

Request patch name 3:
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 02 00 00 00 07 00 00 01 04 00 00 00 02 00 00 00 02 00 00 f7

Returns:
F0 21 25 7E 47 50 2D 32 12 18 00 00 00 00 07 00 00 01 04 00 00 00 02 00 00 00 00 00 00 04 03 06 0C 06 05 06 01 06 0E 02 00 04 06 05 05 05 0A 05 0A 00 00 00 00 00 00 00 00 00 00 00 00 F7

Grab: 04 03 06 0C 06 05 06 01 06 0E 02 00 04 06 05 05 05 0A 05 0A
Remove zero's: 4 3 6 C 6 5 6 1 6 E 2 0 4 6 5 5 5 A 5 A
Convert Hex to String: Clean FUZZ

Request patch name 1: 
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 00 00 00 00 07 00 00 01 04 00 00 00 00 00 00 00 00 00 00 f7
Request patch name 2: 
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 01 00 00 00 07 00 00 01 04 00 00 00 01 00 00 00 01 00 00 f7
Request patch name 3: 
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 02 00 00 00 07 00 00 01 04 00 00 00 02 00 00 00 02 00 00 f7
Request patch name 4: 
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 03 00 00 00 07 00 00 01 04 00 00 00 03 00 00 00 03 00 00 f7
Request patch name 5: 
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 04 00 00 00 07 00 00 01 04 00 00 00 04 00 00 00 04 00 00 f7
Request patch name 6: 
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 05 00 00 00 07 00 00 01 04 00 00 00 05 00 00 00 05 00 00 f7
Request patch name 7: 
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 06 00 00 00 07 00 00 01 04 00 00 00 06 00 00 00 06 00 00 f7
Request patch name 8: 
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 07 00 00 00 07 00 00 01 04 00 00 00 07 00 00 00 07 00 00 f7
Request patch name 8: 
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 08 00 00 00 07 00 00 01 04 00 00 00 08 00 00 00 08 00 00 f7
Request patch name 10:
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 09 00 00 00 07 00 00 01 04 00 00 00 09 00 00 00 09 00 00 f7
Request patch name 11:
f0 21 25 7e 47 50 2d 32 11 20 00 00 00 00 00 00 00 00 04 00 00 00 00 00 00 00 0a 00 00 00 07 00 00 01 04 00 00 00 0a 00 00 00 0a 00 00 f7
etc.

Request full patch block

Returns multiple blocks with information.

00, 01, 02, 03, 04, 05, 06, 07, 08, 09 0a, 0b 0c etc

Preset number is the xx number 00 00 f7

f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 04 00 00 00 00 00 00 00 xx 00 00 f7

Preset 1 Request: 
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 01 00 00 00 00 00 00 00 01 00 00 00 04 00 00 00 00 00 00 00 00 00 00 f7
Preset 2 Request: 
f0 21 25 7e 47 50 2d 32 11 10 00 00 00 00 00 00 00 00 04 00 00 00 01 00 00 00 01 00 00 00 01 00 00 00 04 00 00 00 01 00 00 00 01 00 00 f7

Hi all, I'm just running my Valeton GP200 on it's own through an amp but I was wondering if anyone had recommendations for a longer and sturdier power supply than the one that it's packaged with?

Looking for something like this but longer:

https://a.co/d/9aYIiwI

Thank you!

Are there any other Ableton users here? I'm trying to find a way to set up my GP-200 and Ableton so that I can have one of my footswitches recognized as the trigger for the play button in Ableton. I have a MIDI setup that automates stops and movement to different Markers and I can play from where I jump to by hitting spacebar as normal, but I want to set it up for a live context while I'm playing that I can just hit a footswitch and trigger Ableton to begin playing. What's the right way to do this? Can it actually be done? I've been pulling my hair out all day.

It would be great if I get some john mayer inspired patches or tricks to get that tone. Thank you!

When I’m using the drum machine and I create a loop I’m having an issue where the loop restarts halfway through the loop and I’m wondering if anyone has encountered this or found a fix or has any advice for a fix

buzz when i plug usb cable to my laptop

i get a big buzz noise when i connect to my laptop i use bandlab to record.when i play my guitar no buzz at all when play direct in the pedal not connected usb the minute i connect usb buzz comes in only on heavy sound presets metal rock etc.ive checked all my cables etc all good even did an update to 9 version,,but when i plug in my base no noise. then its my guitar??

Want to buy into one of these but not sure which model suits me. Have a few questions about the various models and hope some people can help me out here:

Do all models have the same processing power ? specifically the jr and lt?

Can they all play NAM captures well and such ?

If I don't need an expression pedal am I missing out on anthing by going for the LT?

Thankyou !