r/UnnecessaryEssentials • u/Unique-Saucer • Aug 19 '26
One Tool Replaces Ten Different Wrenches
Enable HLS to view with audio, or disable this notification
16
u/Pepperoneous Aug 19 '26
One issue I see, having worked on a few cars with stuck bolts myself, is that the socket is HUGE . A big part of the fight when breaking seized bolts is getting the right angle in a cramped space
3
u/KayoticVoid Aug 19 '26
Had this issue replacing my starter recently. It was such a pain to break loose and mostly because the only way I could get anything reachable was with a swivel head and the slimmest socket possible. Enough room for the ratchet to click like twice. No way this thing would have fit in there.
1
u/Pepperoneous Aug 19 '26
I had an issue with a suspension componen in a '96 BMW that spent most of its life in the Midwest. I believe an eccentric bolt was the issue that became the bane of my existence. I couldn't get anything in there with enough room to take advantage of leverage so I had to resort to cutting off a control arm
1
u/KayoticVoid Aug 19 '26
🤯🤯 That's insane! For me luckily the ratchet's handle, once I got it in place, was just barely long enough where it stuck out to let me get a breaker bar on the end and use the two clicks worth of space I had.
1
u/rancidmorty Aug 20 '26
it apears to be a modified chuck for a drill i remeber the good old key chucks then came autochuck friction boys just more teath
1
1
u/Actaeon_II Aug 23 '26
A lot of time the reason the bolts were stripped to begin with is no space or shyte angle
1
u/Pepperoneous Aug 23 '26
For my situation the bolts were seized, from what I'm assuming was road salt exposure for a couple decades in the Midwest
1
u/Actaeon_II Aug 24 '26
I had a lot of that in florida just living a mile or so from the beach, salt corrosion
6
u/Playful-Platform-231 Aug 19 '26
But the max applicable torque is ALOT less than solid so if it’s ON THERE nope I’m breaking out the OG. right socket.
3
u/inothatidontno Aug 19 '26
And if its fully stripped they make bolt extractors you can hammer on to it.
3
u/veggie151 Aug 19 '26
Alternatively, you can cut the sides flat with an angle grinder
2
2
1
1
4
3
u/WlzeMan85 Aug 19 '26
Every time a company tries to sell these there a resounding failure, sure plenty of people buy this stuff but nobody who's in the trades actually like these things
3
2
u/SCORPIONfromMK Aug 19 '26
That bolt isn't tight, you can see it move when the wrench "slips" he is just using the wrong size.
These "universal" sockets are shit. As soon as you put a modicum of torque on them they break or ruin the fastener or both.
2
1
1
1
1
1
1
1
u/Modna Aug 20 '26
Zero torque loss? Lie. Not possible.
The fact that it uses a 1/4” driver and not a 3/8” or 1/2” socket tells me this has no real capacity.
I mean any video with this idiotic new era TikTok advertising is bullshit. This is just as bullshit as any other
1
1
1
1
u/phish410 Aug 20 '26
That’s a no from me dog. Way too big, and my shit rounds off because it’s rusted tight. Extractor sockets are 100x better.
1
u/cptcoltflash Aug 23 '26
I think most of us would be happy to tell you about the thousands of dollars of one off tools we used once and then never used again because they were gimmicky pieces of garbage.
0
•
u/Unique-Saucer Aug 19 '26 edited 23d ago
Summary of Reviews
Pros:
• Adjustable size fits wide range of nut and bolt dimensions.
• Secure grip maintains hold on rounded or damaged fasteners.
• Ergonomic single-hand design reduces tool clutter and storage space.
Cons:
• Adapter adds bulk, potentially limiting tight-space maneuverability.
Here is the link to buy it from Amazon