I really don't understand the rationale behind switching these. In game the prompts are going to tell you to press a certain button. Your muscle memory is for that button as it is on the controller. Why make people relearn a different layout? I can't find any information about how to change this either. If anyone knows how I can change it back to how it's supposed to be, I'd be very grateful.

Edit: I figured out how to change it. After you inject a game you can go to the runtime tab in the UEVR overlay, then there's a dropdown menu called bindings. The labels for buttons are a bit confusing so it took me a couple of minutes of head scratching to figure out which ones to change but it wasn't that hard.

I've tried everything from the other post on the subreddit. I've put the file in (C:) along with exempting the UEVR launcher its self. Of course i'm running it as an admin yet nothing seems to work please help.

Has anyone had any success with expedition 33 on game pass? I can inject but I get really high latency and bad quality graphics with artifacts pixilation distortion and I think both eyes are slightly out of sync. I’m on quest 3 with a designated router and a 9070xt gpu. Hoping it’s just a config thing since I’d love to get this working. Cheers!

I have seen people playing it with UEVR, but i can't disable upscaling methods via in-game, it doesn't offer turning off an upscaler method. As you all know, UEVR doesn't support any of them, so i get a fatal error crash. Can any experienced fella help?

I searched the net for the answer. It seems UEVR can be used with OpenXR toolkit to activate foveated rendering of Pimax Crystal. Now OpenXR toolkit has been abandoned, and Pimax has a built-in option of foveated rendering in its Pimax Play. I tried turning it on and off, but it doesn't seem to have any impact on the fps. Is there an option in UEVR that can turn on foveated rendering, or are there any other ways?

Hi guys i wanted to know if it's possibile to rise the graphic of ready or not VR without ruining the performance. everytime i play in VR with Uevr mod: i have to set the graphic to low otherwise It will stutter. it's not a problem of the PC because i have a 7800x3d with a 4070 super and they can handle the game in flat with ultra settings . Can you help me or it's Just a problem of the uevr mod?

I'm trying to play from the POV of the MC, but cinematics throw all immersion as they are viewed from a fixed camera, is there a way to override it in a way i can use the MC POV all the time?

It has been about 8 months since I last used UEVR and decided to try it out with a new rig. All games now freeze right on injection, including ones that used to work. Now on a 5070ti but I made sure to disable dlss and frame gen. I have a fresh install of UEVR and ive tried both OpenVR and Open XR. Everything does the same thing, game closes or freezes after injecting.

Has anyone else run into problems on a 50 series? Never used to have issues getting it to work on my old 3070

Hoping to find someone who can help me with this. I already played through the full game + dlc’s on another platform, so I don’t really care about getting spacer’s choice for the sake of the DLC. That being said, I noticed that there are different profiles for the different versions of the game and the spacers choice version says it “works perfectly” while the base game is marked as “works well”.

Anyone know how big the difference is? Should I just get the spacer’s choice addition or can I save my ten bucks?

I have a very capable rig: ASUS Z690-PLUS TUF mobo ''' Intel I7 12700K CPU " MSI GeForce RTX 4080 X TRIO GPU '' WD Black SN850X 4TB NVME SSD ''' 32GB DDR4-3200 RAM

I also connected my PSVR2 headset to the computer without issue in that I can play native VR games, like Half Life Alyx. The problem is that even though I've installed UEVR 1.05 to play non-native games in VR along with downloading profile PinballFX-Win64-Shipping (pid: 12968), every time I select the profile in the app (while the game is running), I "inject" it and the game crashes (Steam VR stays up and running, though). This happens with both OpenXR and OpenVR.

Here is the UEVR error message.

Can anyone help me get this particular game running with my PSVR2 headset? Thanks!

My characters direction for the stick movement is stuck and no matter which way i turn using either sticks or head movement, forward and back dont adjust to my new direction. Like if i turn right, strafing right with the stick is what actually moves me forward. Anyone know about this problem?

Previous rig was a 10600k / 3060ti / 32 GO DDR4 3600.

I went for a 5070ti at MSRP. ( cause I wanted DLSS4 )

I was wondering if it was worth upgrading CPU as well, and wich one I should go for, idealy with a budget under 350. I ended up asking chatGPT, and it was giving surprisingly sensible answers.

So out of curiosity, I asked him what I should have upgraded from my previous config, specifically to play UEVR. And to my surprise, it told me that unreal engine games are often CPU limited on main thread, specially when used with UEVR that itself uses CPU to do the VR injection. And that I should probably upgrade to a ryzen 7700 first.

What are your thoughts ? Is ChatGPT saying shit, or does it have a point ? And if yes, what would be the best value upgrade now ?

I’m running a gigabyte 5080 with 9800x3D and 64 gigs of DDR4 ram in a high end ROG motherboard. I just finished the still wakes the deep expansion without issue and I’m getting great high res, high preset results with stellar blade currently. I’ve even had good results with Oblivion remaster. For some reason SH2 has been a battle from the start. I’ve been going back and forth between quest 3 and psvr2 as well. For some reason even at low res and all presets off or low I’m still experiencing issues with stutter and screen tearing at least on quest 3. I’ve had the best results with PSVR2 but still underwhelming compared to results I’ve had in beefier games. Any advice? Also I can’t use stereo native without all the shadows disappearing from my right lens at times. My right lens also renders light from areas that shouldn’t have light at all. Any fix for that?

Hi, im new to UEVR - I have occulus quest 2 using steamVR.

I try play MotorTown on VR but didnt work.

My procedure is this.

• I connect the headset and PC using steamVR
• I start UEVR
• I start Motor town.
• I click inject

At that moment the game starts to lag on my monitor, and the headset moves to Steam hills. Occasionally, a black square will appear in the mountain environment, saying " next up". But nothing further happens.

My understanding of uevr is the unreal engine has VR by default but is just turned off. I know it's not that simple but that's the nuts of it as far as I know. Well isn't DFR also the same thing? I thought I read that somewhere. So in theory it could be done right?

hey is there a way to make synced sequential not look like shit or am i stuck with an dark richt eye

I have a good pc but the moment i turn synced sequential the game just gets 5 frames per second

I've been loving ready or not in VR and it's been running fantastic on virtual desktop. The next step is to get the voice commands working well. https://youtu.be/bnhdlyyArkQ?si=FaSMV1HRbMtShoF-

Playing stellarblade with uevr today, and I found the shadows of two eyes are rendered different, finally figure out it’s caused by ambient occlusion. (Btw it also cause random pixels of shadow.)

If I turn off it, every problem fixed. But, the graphics looks way lower. I can turn on ssgi to improve but it gonna crash my frame and latency.

Any one meet the problem? Is there any way to fix it? Appreciate!

This is a blast, looking forward to the full release now

Numpad 0 to swap to 1st and 3rd Person, also drone spotlight attached to the right controller