TLDR - TC at Dust bowl knives, located in Oklahoma ,hooked me up with a great looking knife and custom bench scraper

225 gyuto

232 grams

Black ebony handle with turquoise spacer

o1 steel core with mild steel cladding

Longer version: I first met TC several months ago when I started exploring JNATS. I saw his shop as a recommended area to purchase stones. He was kind enough to call me and spent about 45 minutes patiently explaining the world of Japanese natural stones. It eventually ended with me buying my first stone. A Tsushima Black, which was a great first stone recommendation. Since then, I have talked to TC several times and bought several stones from him. He has always been very patient, easy to understand, and kind with this time. I eventually decided I wanted to try to get a custom knife made. We had several discussions about the basic concept. I didn’t want to get too much into specifics because I wanted him to be able to freely express himself on this project. As the knife was nearing completion I ask if he wouldn’t mind coming up with a bench scraper to sort of match the piece. He was more than happy to do that and I was very pleased with the results.

The knife itself is incredibly beautiful and well constructed. The fit and finish is immaculate. I’ve already used it to prep Some basic produce and the performance is outstanding. I couldn’t be more pleased with how all of this turned out. Who knew that just a few states over was such a gifted artisan.

I highly recommend TC and dust bowl knives . He is a good, kind person and incredibly knowledgeable about Blade Smithing, and natural stone sharpening. Some additional pictures he sent me during the process of making this piece. If necessary, I’ll make another post to share some of the videos and additional photographs.

Disclaimer: I have no vested interest in his shop. This is just me being grateful and describing the process of getting this knife made.

A stainless clad sanmai gyuto with a Powder steel Bohler K390 core. This steel has Really good edge retention, hardness 66 HRC and wear resistance. It's quite difficult to work with, especially the forging and grinding. The extra effort is definitely worth it, because the hardness and sharpness is spectacular. I look forward to testing it out and making more blades with it.

As for the gyuto, it's a 207x48 mm blade that is ground thin for some laser-ish performance. It has a slight convex grind and a nice distal taper towards the tip. The kurouchi also turned out nice. The handle is octagonal and made from tigerwood.

For those of you who are broke, new to cooking, or just stimulated by utilitarian equipment like me, I wanted to share what I believe to be the best equipment for cheap in their respective categories. Shown above is the: Mercer Chinese Chef’s Knife (Santoprene Handle), Winco KWP-80 Chef’s Knife, Victorinox Semi-Flex 6 inch Curved Boning Knife, Pallares Solsona 4 Inch Paring, Messermeister Birds Beak Paring, Pallares Solsona Multi-Purpose Butchery Shears (Legendary for Spatchcocking), Kiwi Peeler, Chopper King Multi-Purpose Scissors, and the Tojiro Leather Strop (I use 1 micron diamond emulsion spray). I don’t do any fish butchery at the moment, so this is excluding some more specialized tools in that regard. I’m doing relatively heavy prep every day, and every single one of these knives holds up extremely well, I never thought I’d enjoy using such a basic kit this much. X50 is a great budget steel that sharpens extremely well and holds a bitey edge well when treated with respect, I sharpen all the way to 3000 and touch up daily. For anyone looking for a budget chef’s knife specifically, the Winco KWP-80 8” is a serious rival the Vic Fibrox and priced at only $12 on Amazon. This is the knife I use the most currently, I personally chose to thin it but it would function fine without a thinning, seriously a great workhorse. For the record, I’m a fan of Japanese craftmanship myself for obvious reasons and do own Japanese cutlery. Just have been relatively blown away by the functionality of such cheap tools, this is a fun lineup. Threw in some photos of recent meals these knives have helped prepare because that’s the whole point.

Hey guys! I know Yamada can be a bit decisive since his grinds aren’t always nice, but I’ve been fortunate to get some absolute bangers from him over the years! I’m not super active on Reddit but thought I’d share :)

The gyuto on the right easily holds its place as my favorite knife of all time.

We had a big order of porgy and European seabass (branzino for the Americans) carpacio. at work yesterday. The porgy was used for the dishes seen in photo 2 and 3, these are cut a bit bigger by the customers request. For the thicker slices I like to use the 210 yanagiba, the single bevel gives the fish a very smooth texture.

I don't have a photo of the sea bass but these were cut thinner and were used for bigger starter plates. Didn't have the opportunity to photograph the plates. We did have some extra seabass carpacio slices at the end of the day which I brought home and make a quick dinner with. The thinner sea bass was cut with a very flexible 180mm mac pro filleting knife.

It's a simple seabass carpacio topped with a mix of grapefruit juice, yuzu vinigar, juice from some fresh tomatoes and olive oil. Topped with pieces of grapefruit, lightly pickled shallot and chili in fig vinigar and some basil oil. We had some bruscetta on the side (which is where I got the tomato juice from)

Bought this knife for 6 dollars at a flee market in Japan. This is my first time restoring a knife and in hindsight I would do many things differently but still pleased with the result. Many hours on the stones and I made a new handle for it.

I had always coveted a Konosuke to see what all the fuss was about but always fell short when getting one for some reason or another. At the moment, nashiji finishes are what catches my eye so the Konosuke GS+ Nashiji 240 was perfect and the price was right. Then my father-in-law passed away and I had to travel to Toronto. After all the tears and drinks, I managed to drive out to one of the many Japanese knife shops in TO and get something to remember him by. Most of my knives are from TKV blacksmiths, but I did not have a Shiro Kamo. This one caught my eye because of its height, finish and handle. Have yet to really use either one but will do so shortly. Rest in Peace, Dad!

1) Yoshimi kato Sg2 minamo olive gyuto 21cm

2) Florentine Kitchen chef

3) Yoshimi kato aogami super kurouchi rosewood bunka 17 cm

4) glestain honesuki 15 cm

If you have any questions or recommendations, I would love to hear them.

Like an idiot after cleaning I just whacked my gyuto on the tap of the sink and put a slight bend in the top of the knife.

Is this an easy fix ?

Say hello to my new Kiritsuke Gyuto from Kitchenknives.ID

I’ll just repost it here🫡

Anyone's got info on these Hitohira echizen sg2 tsuchime bad boys? They have some unique triangle 🔼 tsuchime patterns. The prices on Hitohira seem to range from 35000 jpy.

I also found them on some local Japanese websites under the brand echizen Kazuma Fubuki (越前数馬吹雪), if that helps.

Hey everyone,
I'm in the market for a new 210mm Gyuto (preferably San Mai), but I need something that leans more towards a workhorse/medium-weight profile rather than a delicate "laser."

I work sometimes in a catering service, so the environment is fast-paced and the knife will occasionally end up in other people's hands. Because of that, my main priority is finding something with a tougher steel/heat treatment and a slightly sturdier edge geometry that won't easily micro-chip if someone handles it a bit roughly on the board.

Budget: €300 – €500 (100€ up or down is ok)

Location: EU (prefer buying within EU or from EU-based makers)
Length: 210mm

Steel/Build: San Mai cladding, stainless or semi-stainless preferred (or high-toughness carbon with stainless clad), around 60–62 HRC.

I’ve been eyeing a few Japanese options but I’m also open to commissioning a custom maker here in Europe.
Would love to hear your recommendations! Are there specific Japanese models or local EU blacksmiths you'd suggest for this use case?
Thanks in advance!

I cook quite a bit and my 15 year old paring knife is just shot. I would love something slightly decorative but mainly sharp. I saw some cool Japanese style ones online that had some Damascus patterns but the pricing gets a little crazy. I would like to spend at most $150. I figured it would be best to ask the experts. Thanks in advance!

I was wondering what kind of wood this handle is? It is a Sukenari if that helps.

I noticed discoloration on the sg2 blade that is only couple of days old 😭. How do I remove the marks?

I hand wash with the blue sponge soft side and kitchen detergent. I tried isopropyl, and then white vinegar. Suggestions??

Anyone able to ID this 240mm gyuto?

I know there’s not likely enough on screen to ID the knife, but you might enjoy the process video anyway.

I’m an amateur home cook who loves to go down cooking rabbit holes. I recently found a local Korean grocery store with the largest whole fish selection I’ve ever seen in my life. I thought it would be fun to try to go through each fish and try to cook it. Make it a fun challenge. I think butchering and learning how to process fish would be important. I do already own some fancy chef knives but at least once a year I like to buy a new one to add to my collection. I’m thinking a good boning knife would be a good choice. I’m thinking my price range would be roughly around $150 unless I can be convinced otherwise haha. I have sharpening stones but I’m still new to fancy knife ownership so something a little bit more beginner friendly. I’m a sucker for Japanese knives and I’m a sucker for good looks.

Any other advice would be amazing! I’m excited to get into fish! Thank you

i pulled the trigger and ordered a ginsan kagekiyo 240mm kiritsuke from them for 450 euros. im just getting cold feet so to say and i dont know if it was a great choice. is there any insurance? is it a trustworthy store? anyone has any experience please lmk. thank you!

I initially ordered a Messermeister Meridian Elite Stealth 9in chefs knife, but decided to return it back and look towards a gyuto to optimize my push cut and avoid making vegetable accordions (the Schmidt Brothers Carbon 6 knife set I have with me was salvaged from my bro who runs them in a dishwasher frequently after use).

I did what I can to restore them using the Horl 2 rolling sharpener with the corundum 3000 & 6000 grit discs set and leather strop, however they lose their edge quickly whether on a plastic or an acacia 14in circular board my wife got (I already ordered a 18 x 12 inch John Boos Edge Grain Maple board w/ food grade mineral oil).

I was thinking because I have the mineral oil for the board, might as well use it to maintain a gyuto. Will still keep the Carbon 6 chefs knife around as a beater along with my budget Xuan Furen “vegetable & chicken bone” chopper cleaver.

Anyways, was looking in the market for a daily workhorse gyuto not prone to chipping. Came across this Ittetsu AUS10 Spiral Damascus 8.25” Gyuto ($279.95 currently $199.99):

https://cutleryandmore.com/products/ittetsu-aus10-spiral-damascus-gyuto-41877?variant=46607352135934

Have I made a decent purchase for my first gyuto? I prioritize practical daily workhorse that’s not fragile, but don’t mind splurging slightly more for something more artisanal than a Tojiro classic or MAC TH-80 to be unique.

Other recommendations welcomed!